Vacuum Former
| Vacuum Former | |
|---|---|
| |
| Name | Vacuum Former/VacuuForm |
| Zone | Commons Area
|
| Owner | John Sugg |
| Make Model | Proto Form. Plans-built Vacuum Former |
| Part Number | J |
| Date Acquired | |
| Storage Location | The machine is on casters so it rolls around a lot. However, the vacuum former is stored in MESA. |
| Authorization Required | No |
| Status | Running |
| Value |
|
| Documentation | |
| Other References | Reference this.
what a vacuum former does https://www.youtube.com/watch?v=hukafUxglmE |
Intro
A custom built vacuum former. Built at I3Detroit
Here is another video https://www.youtube.com/watch?v=Cacr1WeKOzY
Handout from John Sugg
https://www.i3detroit.org/wi/images/6/6b/I3-vacuum-form-operating-v2.pdf
NOTE: no more 120v plug
Rules
Do not turn vac pump off during operation or vac pump could be damaged. Do not use a buck with hollow bottom surface or platen could be damaged.
Instructions
While it is simple to operate, this tool can be damaged if not used properly. Please read the instructions before use.
The forming area is 22.5sq", you probably want at least 24" so the plastic is held well.
Maintenance Info
Report any problems to Kiln Zone Coordinator or sugg3d@comcast.net
FAQ
Plastics that work well:
- 0.03" Polystyrene (this is what the examples are)
ToDo
- Please create list of materials that can be used, with suggested suppliers
- Basic tutorial & instructions would be helpful
