Band Saw Insert Training
Band Saw Insert Training is required for all users of the Powermatic_14_inch_Bandsaw in the Wood_Shop.
Training Outline
- What can you do after this training?
- You are authorized to use the saw. Making adjustments and changing blades requires additional training.
- Where is the insert?
- Why is the insert needed?
- How do you check whether the insert is broken?
- Lift with narrow-blade screwdriver in tab slot
- Unplug saw or switch off at fuse box before reaching under saw
- What should you do if the insert is broken?
- Please contact the Wood Shop coordinators
- What two factors can cause the insert to break?
- Workpiece supported by the insert (total cutting force on insert)
- Workpiece rolling into the blade (blade teeth dig in instead of shaving)
- How do those two factors increase the chance of sawing off a finger?
- Small workpiece puts fingers closer to blade
- Rolling workpiece can pull finger into blade
- What must you do to protect the insert and protect your fingers?
- Workpiece must remain stable so teeth shave, not dig in
- Human fingertips are not rigid, they are squishy
- Support a small workpiece with a waste board larger than the insert
- Clamp / hot-glue / double-sided-tape the workpiece rigidly onto the waste board
- Use push block and push stick to keep fingers away from blade
- Workpiece must remain stable so teeth shave, not dig in
- Required student project: fixture and cut a workpiece smaller than the insert, using the push stick and push block
Trainers
- Dave Scholl
- David Jewell
- Roger Slykhouse
User Training Log
User | Trained By | Date Trained |
---|---|---|
David Jewell | Dave Scholl | 10-25-2016 |
James O'Dell | Dave Scholl | 10-25-2016 |
Cameron Geralds | David Jewell | 10-25-2016 |
Roger Slykhouse | Dave Scholl | 10-30-2016 |
Lew Dennison | Dave Scholl | 10-30-2016 |
Arthur Bledsoe | Roger Slykhouse | 10-30-2016 |
Leora Druckman | Roger Slykhouse | 10-30-2016 |
Gary Morin | Dave Scholl | 11-01-2016 |
Steve Nowicki | Dave Scholl | 11-01-2016 |
Kenn Goodrich | Dave Scholl | 11-01-2016 |
Clayton McCord | Dave Scholl | 11-01-2016 |
James Freed | Dave Scholl | 11-01-2016 |
Sam Walker | Dave Scholl | 11-01-2016 |
Jon Anderson | Dave Scholl | 11-01-2016 |
Richard Hillier | Dave Scholl | 11-01-2016 |
Brian Logsdon | Dave Scholl | 11-01-2016 |
Tom Nardone | Dave Scholl | 11-01-2016 |
Tony Slover | Dave Scholl | 11-15-2016 |
Tony Klein | Dave Scholl | 11-15-2016 |
Frank Arthmire | Dave Scholl | 11-15-2016 |
David Henry | Dave Scholl | 11-15-2016 |
Rich Points | Dave Scholl | 01-03-2017 |
Mike Fink | Dave Scholl | 01-03-2017 |
Augie Englehart | Dave Scholl | 01-03-2017 |
Kevin Flory | Dave Scholl | 01-03-2017 |
Mark Payne Jr. | Dave Scholl | 01-31-2017 |
Michael Williams | Dave Scholl | 01-31-2017 |
Mark Furland | Dave Scholl | 01-31-2017 |
Nathan Schleicher | Roger Slykhouse | 02-27-2017 |
Will Hinchman | Dave Scholl | 02-28-2017 |
Patrick Irish | Dave Scholl | 03-21-2017 |
Bravin Neff | Roger Slykhouse | 04-27-2017 |
Jake Gedrimas | Roger Slykhouse | 05-14-2017 |
Charlie Rysenga | Roger Slykhouse | 05-14-2017 |
Evan Parizot | Roger Slykhouse | 05-14-2017 |
Sasha Brandt | Roger Slykhouse | 06-21-2017 |
Sam Letvin | Roger Slykhouse | 07-09-2017 |
Adam Schrader | Dave Scholl | 08-05-2017 |
Walker Archer | Dave Scholl | 08-05-2017 |
Thomas Tufts | Dave Scholl | 08-05-2017 |
Jeff Sebring | Dave Scholl | 11-21-2017 |
Bryan Boyer | Dave Scholl | 12-19-2017 |
Mike Schweyen | Dave Scholl | 05-15-2018 |
Cyrille Goldstein | Dave Scholl | 05-15-2018 |
Marty Peltz | Dave Scholl | 08-07-2018 |
Brian Maynard | Dave Scholl | 01-02-2019 |
Matt Burlison | Dave Scholl | 04-02-2019 |
Avery Sturzl | Thomas Tusano | 04-29-2019 |