LaserCut

LaserCut 5.3 is the software that Bumblebee and Wolverine use to convert 2D layouts to an MOL file that can be read by the laser cutter The user can either do simple layouts directly in this software, or import layouts / drawings that were made in other software such as Adobe Illustrator, Inkscape, AutoCAD, etc.

Laser Cut 5.3 Video's on Youtube: link LaserCut 5.3 Software Tutorial

LaserCut is installed on the Laser cutter laptop, which lives on the desk next to bumblebee. One way to get your files to the laser cutter is to bring a flashdrive or download your files off of dropbox, etc and use LaserCut on the laptop to export the MOL files to the laser cutter. However, you can also now set up LaserCut on your personal laptop, which means you can get everything set up while hanging out in the commons area (or at home if you plan ahead) and then pop over to the laser only when you're totally ready.

Setting up the software on your personal laptop

This is an advanced step is and is not recommended until you're familiar with the software. Make sure you replace the default syscfg.ini with the appropriate one from the section below, LaserCut#LaserCut System Configurations

1. Download and install both the LaserCut5.3 software and the driver for the laser cutter itself
   • The software and 64-bit drivers can also be found here or on the manufacturer's site
   • The original CD that came with the laser cutter is in the plastic bin on the shelves by the machine. However, the software on the CD only supports XP machines.
   • The manufacturer's website does not list the correct drivers anymore.
2. Before running Lasercut for the first time, you'll need the "soft dog" AKA USB dongle. The dongle lives in the USB port on the right side of the laser cutter laptop. Remember to return the dongle to the laptop
3. Plug in the dongle and open LaserCut. Once LaserCut is open on your computer, you can remove the dongle and keep working. However, you do need the dongle to export files to the laser cutter.
4. Hook up the laser when you're ready. The USB cord that connects to the laser cutter itself also lives in a USB port on the right side of the laser cutter laptop. Just plug it in you're good to go. You may need to restart LaserCut to get the software to see the laser cutter.

Importing vector graphic files

1. File -> New to open a new design
2. File -> Import to browse for your vector graphic file ( .ai, .dxf, etc)
   • Make sure that the "PreView" box is checked and that you can see a preview of your art. If you can't and you're opening an AI file, make sure when saving in Illustrator that "Use compression" is un-checked.
3. Double check the units of your file once it's imported. The laser cutter bed shown in the software is in cm. Importing DXF files from Inkscape sometimes gives screwy units.

Basic design set-up

1. Clean up your tool paths

   Select all the paths in your design, Go to Tools -> Unite Lines. The default tolerance is OK. The idea is to make each path one cut to save time. It will also fix any gaps in your tool paths. LaserCut will show arrowheads on each cut-see picture below.

   

2. Choose your origin.

   Go to Laser -> Set Laser Origin. It doesn't matter where your origin is, as long as you know where it is so you can set the head in the right position relative to your material. The origin will show up as a little blue box. Make sure you double check this before hitting test so the laser head doesn't run into anything.

3. Set up your cut & engrave layers
   • The color of the cut lines corresponds to their layer.
   • When your design is imported, everything will be highlighted red. Click somewhere in empty space to un-select everything to see the real color.
   • Select a path by clicking on it, and then choose a color from the bottom row. All active colors will show up in the Layers window on the right side of the screen, as shown below.
   • The order of the layers in the Layers Window is the order that they will be executed. A good rule of thumb is to move all the engrave layers to the top of the list (select the color next to the layer and hit the "UP" button below the layers list) so that if the materials pops out of place a little from cutting, the engrave will already be done
     
4. Set the power & speed settings for each layer by double-clicking the layer.
   • See the Materials List for recommended power & speed settings but ALWAYS test your material first to avoid wasting material and time on the laser

Send your file to the laser cutter

1. Plug in both the dongle and the laser cutter's USB cord.
2. Save your file in LaserCut. Important: File names are limited to 8 characters.
3. Click the "DownLoad" button on the bottom right side of the screen (see screenshot above). This button should be named something like "Export to Laser Cutter" but then again, nothing should be named a "Soft Dog" so clearly normal naming conventions do not apply to LaserCut
   • If nothing happens, or you get an error here, you may need to restart the software.
4. Click "Del all" in the popup window to clear out any other files that are in the laser cutters memory. (Sometimes bumblebee likes to inexplicably hang on to old files)
5. Click "Download current" to download your current design to the the laser cutter. It may take a little bit depending on the size of your file. You should see YourFileName.mol appear in the window.

Advanced LaserCut Features

Dashed Lines

LaserCut can turn regular cut lines into dashed lines which the laser will then cut in one continuous motion. You could also make dashed lines manually with many small individual cut paths, but the laser would spend a significant amount of additional time accelerating and traveling between dashes. To make a dashed line:

• In the cut options dialog, click the box labeled "..."
• Enter the length of the dashes and the length of the spaces in mm in the "Cut Len" and "Space Len" fields.
  • These can be different values, so the dashes can be longer or shorter than the spaces.
• The "Space start" check box allows a choice between the line starting with a dash or a space.

Array Output

LaserCut can take a single instance of a shape and produce an automated grid of copies of that shape to make many of the same object. This affects every object in the cut area.

• Click the "Set array output options" button on the toolbar.
• The "times" fields let you specify how many copies you would like both horizontally and vertically.
• The "gap" fields let you specify the spacing between each copy along both axes
• The "Gap Along" fields let you specify an offset for each alternating row and column
  • This could be especially useful combined with a negative "gap" value in order to efficiently nest irregular shapes

Manuals

• Original manual
• A working copy of a more user-friendly manual

Other Useful tips

How to make a test box

It's often a good idea to test your speed & power settings before cutting a material for the first time. Here's how to make a simple set of test boxes

1. File -> New
2. Click the Rectangle tool- 2nd icon on the left sidebar.
3. Click and drag to make a totally random sized rectangle
4. With the rectangle selected, click the Size tool on the left sidebar.
5. Enter the desired size in mm. 25x25 will make about a 1" square.
6. Copy and paste the test box to make a row of them
7. Put each box in a new layer and try a range of settings to see what works for your purpose.

LaserCut System Configurations

Launcher

• The batch file replaces the current configuration with a default configuration for the laser cutter you're using.
• The visual basic script runs the batch file without opening an extraneous command prompt window while LaserCut is running.
• Examples scripts for Bumblebee and the full default configurations for Bumblebee, Wolverine, and the Laser Rotary Wheel Attachment follow.

Bumblebee.bat

copy syscfgBumblebee.ini syscfg.ini
Lasercut53.exe

Bumblebee.vbs

'HideScript.vbs
CreateObject("Wscript.Shell").Run "Bumblebee.bat", 0, True

syscfgBumblebee.ini

[Technics] CreateTechnicsCodeNumber=6 CreateTechnicsCodeDefaultMode=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_LINE=TECHNICS_UNKOWN CreateTechnicsCodeDefaultMode_IMAGE=TECHNICS_UNKOWN TechnicsDefaultType=0 CreateTechnicsCodeDefaultMode_16711680=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_0=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_255=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_33023=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_65280=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_32768=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_16776960=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_12615935=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_5987163=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_3421236=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_65535=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_16636309=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_7697781=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_12615680=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_1048455=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_3499673=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_8421376=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_10263708=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_4194368=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_8388736=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_8388863=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_5131854=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_8323072=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_12615808=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_8421440=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_8388672=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_10027161=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_32639=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_11974326=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_6842472=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_8553090=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_16751001=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_16751052=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_3394764=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_8421504=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_11119017=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_2565927=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_9408399=TECHNICS_LASERCUT [CreateTechnicsCode_0] CreateTechnicsCodeName=TECHNICS_LASERCUT [CreateTechnicsCode_1] CreateTechnicsCodeName=TECHNICS_LASERENGRAVE [CreateTechnicsCode_2] CreateTechnicsCodeName=TECHNICS_LASERGRADEENGRAVE [CreateTechnicsCode_3] CreateTechnicsCodeName=TECHNICS_LASERHITPOINT [CreateTechnicsCode_4] CreateTechnicsCodeName=TECHNICS_PENCUT [CreateTechnicsCode_5] CreateTechnicsCodeName=TECHNICS_KNIFECUT [CompanyInfo] TelPhone=Telepnone: SoftName=Lasercut5.3 CompanyName=G Http=www...com PrinterName=Lasercut(Leetro) [ApplicationSetting] OutPutWorkFile=1 FlashDelayTime=10 UserHighConfige=1 ShowDebugWndMsg=0 MainFaceType=0 Mpc05PortNumber=1 SelectOut=0 ShowHandle=1 BackColorRed=210 BackColorGreen=255 BackColorBlue=255 PromptRevise=0 OutputPLTPath=c:\Data.PLT LaserCutForSteel=0 LimitWorkTimes=-1 HideChineseButton=0 TipPreWorkTime=0 EcYXAxisType=0 PrintMode=1 [IMPORTFILE] PREFILEMODE=0 NeedSuckPoint=0 SuckPointTol=0.0 ShowMinPointSize=0.0 ShowMaxPointSize=100.0 CENTERDATA=1 UnitType=0 SysPointDefaultSize=1.0 SysDXFReadPointType=0 SysDXFMaxLength=2000 SysDXFMaxWidth=2000 SysDXFMaxHeight=100 DXFCalBasicPrecision=0.5 DXFNeedCalDataBound=0 MTextTrueTypeSpaceScale=0.25 MTextShxSpaceScale=0.35 AdjustDirect=0 clockwise=1 UseDifferentColor=1 InnerColor=8388863 OutColor=4227072 [MAPARRAY] MoveData=1 [TableSetting] TableGridWidth=50 TableGridHeight=50 [MotionCard_0] MotionCard_Name=Step03Card [Step03Card_0] MotionCardName=Step-servo Co.,Ltd ValidIOLevel=0 ValidLimitLevel=0 LaserPowerMode=0 LaserDefaultPulse=25000 AxisPulseOutputMode=0 AxisPulseOutputLogic=0 ChecHomeIOType=0 CardVer=LH OpenCardTipMsg=0 GradeEngraveType=3 LaserMaxPower=100 CardMinVer=1 LaserPowerTableNumber=20 LaserPowerTable_0=0 LaserPowerTable_5=5 LaserPowerTable_10=10 LaserPowerTable_15=15 LaserPowerTable_20=20 LaserPowerTable_25=25 LaserPowerTable_30=30 LaserPowerTable_35=35 LaserPowerTable_40=40 LaserPowerTable_45=45 LaserPowerTable_50=50 LaserPowerTable_55=55 LaserPowerTable_60=60 LaserPowerTable_65=65 LaserPowerTable_70=70 LaserPowerTable_75=75 LaserPowerTable_80=80 LaserPowerTable_85=85 LaserPowerTable_90=90 LaserPowerTable_95=95 LaserPowerTable_100=100 LaserLowerPulse=1000 LaserLowerPower=0.1 LaserPowerRepairPower=0 TJCardNumber=1 TJCARD_NUMBER_0=41534552 YEncodeRate=10000.000000 YSpdIncrease=300.000000 XEncodeRate=10000.000000 XSpdIncrease=300.000000 YScaleCtrl=5.000000 YIntegralCtrl=0.011500 YDiffCtrl=0.002875 XScaleCtrl=5.000000 XIntegralCtrl=0.011500 XDiffCtrl=0.002875 YScaleCtrlii=5.000000 XScaleCtrlii=5.000000 YZero=0.000000 XZero=0.000000 YIntegralUpLev=100.000000 XIntegralUpLev=100.000000 DaLimY=0.500000 DaLimX=0.500000 WaterProtected=0 ZMoveType=0 CanContinueForEngrave=0 SaveBreakTime=0.1 [Step03LXCard_0] MotionCardName=Step-servo Co.,Ltd ValidIOLevel=0 ValidLimitLevel=0 LaserPowerMode=0 LaserDefaultPulse=25000 AxisPulseOutputMode=1 AxisPulseOutputLogic=0 ChecHomeIOType=0 CardVer=LX OpenCardTipMsg=0 GradeEngraveType=3 CardMinVer=1 LaserMaxPower=100 LaserPowerTableNumber=20 LaserPowerTable_0=0 LaserPowerTable_5=5 LaserPowerTable_10=10 LaserPowerTable_15=15 LaserPowerTable_20=20 LaserPowerTable_25=25 LaserPowerTable_30=30 LaserPowerTable_35=35 LaserPowerTable_40=40 LaserPowerTable_45=45 LaserPowerTable_50=50 LaserPowerTable_55=55 LaserPowerTable_60=60 LaserPowerTable_65=65 LaserPowerTable_70=70 LaserPowerTable_75=75 LaserPowerTable_80=80 LaserPowerTable_85=85 LaserPowerTable_90=90 LaserPowerTable_95=95 LaserPowerTable_100=100 LaserLowerPulse=0 LaserLowerPower=0 TestCardNumber=1 SupportArcMove=0 SupportBezierMove=0 ConAccStartSpeed=200.0 MaxTrackNumInBuffer=500 ChangLaserIONumber=0 [Setup] ShortCutTip=LaserCut 5.3 ExecuteFileName = LaserCut53.exe TipSetupChineseLanguage=1 SetUpType=0 AutoCADTip=AutoCAD CoreDrawTip=CorelDraw LaserCutTip=LaserCut53 InstallPath=C:\LaserCut53 [ONEAXIS_DEFAULT] CoordSystem_Name=单轴 SysOutputIOOID_1=-1 SysOutputIOOID_2=-1 OutputIOValue_1=-1 OutputIOValue_2=-1 SysAxisOID=1 OnePulseMoveLength=0.00078125 TableLength=150 TableMinPosition=0 TableMaxPosition=150 OriginDirector=-1 OriginPosition=0 GoOriginSpeed=2 OriginOffsetLen=1.5 NeedRevise=0 StartSpeed=0.5 WorkAcc=100 HandFastMoveSpeed = 15 HandSlowMoveSpeed = 1 [TWOAXIS_DEFAULT] CoordSystem_Name=两轴 SysOutputIOOID_1=-1 SysOutputIOOID_2=-1 OneAxisSysOID=0 TwoAxisSysOID=1 OneAxisOnePulseMoveLength=0.004843750000000 TwoAxisOnePulseMoveLength=0.004843750000000 OneAxisTableLength=1000.000000 TwoAxisTableLength=600.000000 OneAxisTableMinPosition=0.000000 OneAxisTableMaxPosition=1000.000000 TwoAxisTableMinPosition=0.000000 TwoAxisTableMaxPosition=600.000000 OneAxisOriginDirector=-1 TwoAxisOriginDirector=1 OneAxisOriginPosition=0.000000 TwoAxisOriginPosition=600.000000 OneAxisGoOriginSpeed=15.000000 TwoAxisGoOriginSpeed=15.000000 NeedRevise=0 StartSpeed=10.000000 WorkAcc=1200.000000 SpaceSpeed=300.000000 ConstantSpeed=10.000000 HandFastMoveSpeed=200.000000 HandSlowMoveSpeed=50.000000 OneAxisBackLashLength=0.0 TwoAxisBackLashLength=0.0 [CoordSystem_0] CoordSystem_Type=TWOAXIS [CoordSystem_1] CoordSystem_Type=ONEAXIS [CoordSystem_2] CoordSystem_Type=THREEAXIS [TWOAXIS_0] CoordSystem_Name=工作台 SysOutputIOOID_1=-1 SysOutputIOOID_2=-1 OneAxisSysOID=0 TwoAxisSysOID=1 OneAxisOnePulseMoveLength=0.007200000000000 TwoAxisOnePulseMoveLength=0.007200000000000 OneAxisTableLength=1200.000000 TwoAxisTableLength=900.000000 OneAxisTableMinPosition=0.000000 OneAxisTableMaxPosition=1200.000000 TwoAxisTableMinPosition=0.000000 TwoAxisTableMaxPosition=900.000000 OneAxisOriginDirector=1 TwoAxisOriginDirector=1 OneAxisOriginPosition=1200.000000 TwoAxisOriginPosition=900.000000 OneAxisGoOriginSpeed=150.000000 TwoAxisGoOriginSpeed=150.000000 OneAxisOriginOffsetLen=5 TwoAxisOriginOffsetLen=5 NeedRevise=1 StartSpeed=5.000000 WorkAcc=500.000000 SpaceSpeed=150.000000 ConstantSpeed=8.000000 HandFastMoveSpeed=200.000000 HandSlowMoveSpeed=160.000000 OneAxisOverLapLength=0.000000 WorkAcc2=700.000000 SupportTwoXAxis=0 TwoXAxisOffsetY2=0 OneAxisOnePulseMoveLength2=0.00484375 TwoXAxisPulseMoveLen=0.0062320000 TwoXAxisReduceLen=70 ParkStartSpeedScale=1.0 ParkAccScale=1.0 ParkSpeedScale=1.0 WorkAccAcc=15000.000000 SpaceAccAcc=15000.000000 XAxisMaxChangeSpeed=10.000000 YAxisMaxChangeSpeed=10.000000 SupportTwoLaser=0 TwoLaserSpaceLength=0.000000 [ONEAXIS_1] CoordSystem_Name=转料 SysOutputIOOID_1=-1 SysOutputIOOID_2=-1 SysAxisOID=2 OnePulseMoveLength=0.001250000000000 TableLength=380.000000 TableMinPosition=0.000000 TableMaxPosition=380.000000 OriginDirector=1 OriginPosition=380.000000 GoOriginSpeed=0.000000 OriginOffsetLen=7.500000 NeedRevise=0 WorkAcc=15.000000 HandFastMoveSpeed =15.000000 HandSlowMoveSpeed =10.000000 StartSpeed=5.000000 SpaceSpeed=10.000000 WorkAccAcc=20000.000000 SpaceAccAcc=80000.000000 AxisMaxChangeSpeed=30.000000 [HandMoveCoordSystem_DEFAULT] HandMoveAxis1Increase=-1 HandMoveAxis1Reduce=-1 HandMoveAxis2Increase=-1 HandMoveAxis2Reduce=-1 HandMoveAxis3Increase=-1 HandMoveAxis3Reduce=-1 HandMoveSpeed=-1 HandMoveStepOrContinue=-1 [Technics_Laser_Data] ExportRows=1 ExportColumns=1 ExportRowSpace=0.00000 ExportColumnSpace=0.00000 ExportRowCW=0.00000 ExportColumnCW=0.00000 DrawArrayDataType=1 LogicOrgPostionType=1 ArrayExportOrder=1 ArrayExportXOrder=1 ArrayExportYOrder=1 AtOnceExport=1 OutputTimes=1 DelayTime=0 FeedLength=0.000000 FeedSpeed=5.000000 MachineHasWorkMinute=9561 FeedDelayTime=0 ChangeSerialNo=0 OuputLayerOrderType=1 IsTwoLaserWorking=1 [LaserSimulateSpeedScale] SimulateSpeedScaleNumber = 3 SimulateSpeed0_Min=0 SimulateSpeed0_Max=100 SimulateSpeed0_Scale=1 SimulateSpeed1_Min=100 SimulateSpeed1_Max=500 SimulateSpeed1_Scale=1 SimulateSpeed2_Min=500 SimulateSpeed2_Max=5000 SimulateSpeed2_Scale=1 [MACHINE_MODIFYCFG] LASER_MODIFYCFG_SAVEPASSWORD=1 LASER_MODIFYCFG_PASSWORD=0 [RUNTIMECFG] OneCoordSys_ONEAXIS_PULSE=1600 OneCoordSys_ONEAXIS_LENGTH=0.000000 TwoCoordSys_ONEAXIS_PULSE=5000 TwoCoordSys_ONEAXIS_LENGTH=36.000000 TwoCoordSys_TWOAXIS_PULSE=5000 TwoCoordSys_TWOAXIS_LENGTH=36 IMPORTFILE_CENTERDATA=1 CombineLine_TOL=0.010000 SmoothLine_JB=0 AdjustStartPt=0 NeedPartWorkCtrol=0 StartWorkDelayTime=0 NeedControlMainAxis=0 OverWorkDelayTime=0 TwoCoordSys_TWOAXIS_PULSE2=6400 TwoCoordSys_TWOAXIS_LENGTH2=50 [ResourceManager] CreateDefaultLanguageFile=0 [GEOMETRY] SupportARC=0 [FileFormatCfg_dst] MaxCurveNumber=1500 MustCloseBlock=1 SmoothTol=0.500000 [FileFormatCfg_plt] MaxCurveNumber=1500 DrawPLTUnit=1016.000000 [FileFormatCfg_ai] MaxCurveNumber=1400 [FileFormatCfg_eps] MaxCurveNumber=1400 [FileFormatCfg_bmp] MaxCurveNumber=1400 [Laser] AutoSimulateSpeed=0 [DataCheck] overlap=0 selfinter=1 close=1 intersection=0 overlaptol=0.01 lineinterTol=0 interwithleadline=1 CheckLayerCode=-1 [COREDRAW_CAD] MustCalSecondFile=1 [OFFSETCFG] OffsetDist=0.100000 OffsetType=0 OffsetTolerance=0.200000 MinPointNum=6 Offset=0 connect=1 [LASERCAD] GetEntitiesType=0 [MachineControl] MachineMotionCardNumber = 1 MachineAXISNumber = 3 MachineInputIONumber=17 MachineOutputIONumber=10 CoordSystemNumber =2 MainCoordSystemID = 0 FeedCoordSystemOID=1 TestMoveLength=50.000000 TestLaserPower=10.000000 StartCmdDoPause=0 MachineInputIODelay=3 ClickLaserTime=0.1 ApplicationLimitType=10 TestOpenLaserType=0 ThreadWorkMode=1 PerWorkTimesApplyHardHome=0 LoopAppylHomeType=1 AtOnceExport=0 ClipBoxPower=25.000000 ClipBoxOffsetLen=2.000000 ClipBoxSpeed=50.000000 RunBoxConnerAcc=100 NeedAlign=0 PerWorkMustGoLogicHome=1 AfterGoHomeToLogicHome=0 TestIsSlowSpeed=0 ClipBoxPower2=40.000000 RunMustDatum=0 AlignMachineZPos=0.000000 LogicOrgPositionX=663.322933 LogicOrgPositionY=435.327613 NeedOutput530=0 SupportSplitBlockOutPut=0 ZAxisForLaserFocus=0 FeedAxisGoHome=0 NeedContinueTipForBlock=0 [MotionAxis_0] MotionCard_Index=0 MotionCard_axisOID=4 [MotionAxis_1] MotionCard_Index=0 MotionCard_axisOID=3 [MotionAxis_2] MotionCard_Index=0 MotionCard_axisOID=2 [MotionInputIO_0];X加 MotionCard_Index=0 MotionCard_InputIOOID=38 [MotionInputIO_1];X减 MotionCard_Index=0 MotionCard_InputIOOID=46 [MotionInputIO_2];Y加 MotionCard_Index=0 MotionCard_InputIOOID=40 [MotionInputIO_3];Y减 MotionCard_Index=0 MotionCard_InputIOOID=36 [MotionInputIO_4];开始 MotionCard_Index=0 MotionCard_InputIOOID=44 [MotionInputIO_5];暂停 MotionCard_Index=0 MotionCard_InputIOOID=8 [MotionInputIO_6];停止 MotionCard_Index=0 MotionCard_InputIOOID=12 [MotionInputIO_7];按键快慢 MotionCard_Index=0 MotionCard_InputIOOID=1 [MotionInputIO_8];步进/连续 MotionCard_Index=0 MotionCard_InputIOOID=1 [MotionInputIO_9];Z加 MotionCard_Index=0 MotionCard_InputIOOID=29 [MotionInputIO_10];Z减 MotionCard_Index=0 MotionCard_InputIOOID=31 [MotionInputIO_11];回原点 MotionCard_Index=0 MotionCard_InputIOOID=10 [MotionInputIO_12];走边框 MotionCard_Index=0 MotionCard_InputIOOID=42 [MotionInputIO_13];激光点射 MotionCard_Index=0 MotionCard_InputIOOID=27 [MotionInputIO_14];XYZ对刀 MotionCard_Index=0 MotionCard_InputIOOID=-1 [MotionInputIO_15];Z轴对刀 MotionCard_Index=0 MotionCard_InputIOOID=-1 [MotionInputIO_16];盖盖保护 MotionCard_Index=0 MotionCard_InputIOOID=-1 [HandMoveCoordSystem_0] HandMoveAxis1Increase=0 HandMoveAxis1Reduce=1 HandMoveAxis2Increase=2 HandMoveAxis2Reduce=3 HandMoveSpeed=7 HandMoveStepOrContinue=8 HandMoveAxis3Increase=-1 HandMoveAxis3Reduce=-1 [HandMoveCoordSystem_1] HandMoveAxis1Increase=9 HandMoveAxis1Reduce=10 HandMoveSpeed=7 HandMoveStepOrContinue=8 HandMoveAxis2Increase=-1 HandMoveAxis2Reduce=-1 HandMoveAxis3Increase=-1 HandMoveAxis3Reduce=-1 [MotionOutputIO_0];激光开关 MotionCard_Index=0 MotionCard_OutputIOOID=15 [MotionOutputIO_1];功率调整 MotionCard_Index=0 MotionCard_OutputIOOID=18 [MotionOutputIO_2];吹气信号 MotionCard_Index=0 MotionCard_OutputIOOID=150 [MotionOutputIO_3];正在加工，输出的信号 MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_4];随动 MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_5];工作台切换 MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_6]; MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_7];光闸 MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_8];激光 MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_9] MotionCard_Index=0 MotionCard_OutputIOOID=-1 [TECHNICS_LASERCUT] CreateTechnicsCodeName=激光切割 TechnicsCfgType=0 LaserCutCoordSysOID=0 LaserCutConnerPower=60.000000 LaserCutWorkPower=100.000000 LaserCutFrequency=500 LaserCutOptimizePathType=1 LaserCutInnerToOuter=1 LaserCutDownToUpper=0 LaserCutBlockHeight=150.000000 LaserCutAutoSetPathDir=1 LaserCutCicleMinSegNumber=36 LaserCutDisperseLength=0.020000 LaserCutCloseGapLength=0.000000 LaserCutOverlapLength=0.000000 LaserCutAdjustForClose=1 LaserCutQXEnterLength=0.000000 LaserCutDelayMoveTime=0.000000 LaserCutOpenLaserDelayTime=0.000000 LaserCutCloseLaserDelayTime=0.000000 LaserCutOneAxisBackLashLength=0.000000 LaserCutTwoAxisBackLashLength=0.010000 LaserCutBlowGasType=2 LaserCutAheadBlowGasTimes=0.000000 LaserCutNoCloseGasTimes=0.000000 LaserCutSpeed=25.000000 LaserCutGWAcc=60.000000 LaserCutCircleSpeedNum=0 LaserCutCircleSpeed0_MinR=0.000000 LaserCutCircleSpeed0_MaxR=0.550000 LaserCutCircleSpeed0_Speed=10.000000 LaserCutCircleSpeed1_MinR=0.550000 LaserCutCircleSpeed1_MaxR=1.050000 LaserCutCircleSpeed1_Speed=15.000000 LaserCutCircleSpeed2_MinR=1.050000 LaserCutCircleSpeed2_MaxR=1.550000 LaserCutCircleSpeed2_Speed=25.000000 LaserCutCircleSpeed3_MinR=1.550000 LaserCutCircleSpeed3_MaxR=2.050000 LaserCutCircleSpeed3_Speed=30.000000 LaserCutCircleSpeed4_MinR=2.050000 LaserCutCircleSpeed4_MaxR=3.050000 LaserCutCircleSpeed4_Speed=35.000000 LaserCutCircleSpeed5_MinR=3.050000 LaserCutCircleSpeed5_MaxR=4.050000 LaserCutCircleSpeed5_Speed=40.000000 LaserCutGWTime=0.010000 LaserCutTrackSize=100 LaserCutMaxSpeed=400.000000 LaserCutConnerPower2=30.000000 LaserCutWorkPower2=50.000000 LaserCutInnerToOuter2=0 LaserCutStartPosType=0 LaserCutDelayTimeAfterCloseLaser=0.000000 LaserCutBackLashAddSpaceLength=8.000000 LaserCutLineLength=0.000000 SpaceCutLineLength=0.000000 bSpaceLineFirst=0 LaserCutAdjustMove=0 LaserCutAdjustMoveDelay=0.000000 LaserCutUpLen=0.000000 LaserCutDisperseMinLength=0.02 LaserCutOpenGZDelayTime=0.000000 LaserCutSpeedScale1=1.0 LaserCutSpeedScale2=1.0 LaserCutSpeedScale3=1.0 LaserCutSpeedScale4=1.0 LaserCutSpeedScale5=1.0 LaserCutSpeedScale6=1.0 LaserCutSpeedScale7=1.0 LaserCutSpeedScale8=1.0 AdjustStartPointToConner=0 SplitCircleForBY=0 AdjustMoveType=0 WaitInputIODelayTime=5 RepeatOpenLaserTimes=0 SupportAIOutput=0 [TECHNICS_LASERENGRAVE] CreateTechnicsCodeName=激光雕刻 TechnicsCfgType=0 LaserEngraveCoordSysOID=0 LaserEngravePower=100.000000 LaserEngraveFrequency=550 LaserEngraveSpeed=400.000000 LaserEngraveBlowGasType=1 LaserEngraveFillCircleR=2.500000 LaserEngraveFillCircleSpace=2.500000 LaserEngraveFillCircle=0 LaserEngraveTwoDirector=1 LaserEngraveScanStepLen=0.150000 LaserEngraveCfgNumber=5 LaserEngraveMinSpeed_0=0.000000 LaserEngraveMaxSpeed_0=250.000000 LaserEngraveBufferLen_0=25.000000 LaserEngraveChangeDirGap_0=-0.170000 LaserEngraveStartVel_0=45.000000 LaserEngraveAcc_0=6000.000000 LaserEngraveYSpeed_0=10.000000 LaserEngraveYAcc_0=100.000000 LaserEngraveSFOffsetX_0=0.085000 LaserEngraveSFOffsetY_0=0.000000 LaserEngraveExpandPenWidth=0 LaserEngraveExpandPenWidthScale=15.000000 LaserEngraveFillCircleType=0 LaserEngraveMaxSpeed=1000.000000 LaserEngravePower2=60.000000 LaserEngraveScanDirector=0 LaserEngraveMinSpeed_1=250.000000 LaserEngraveMaxSpeed_1=350.000000 LaserEngraveBufferLen_1=25.000000 LaserEngraveChangeDirGap_1=-0.200000 LaserEngraveStartVel_1=45.000000 LaserEngraveAcc_1=6000.000000 LaserEngraveYSpeed_1=10.000000 LaserEngraveYAcc_1=100.000000 LaserEngraveSFOffsetX_1=0.100000 LaserEngraveSFOffsetY_1=0.000000 LaserEngraveMinSpeed_2=350.000000 LaserEngraveMaxSpeed_2=450.000000 LaserEngraveBufferLen_2=25.000000 LaserEngraveChangeDirGap_2=-0.240000 LaserEngraveStartVel_2=45.000000 LaserEngraveAcc_2=6000.000000 LaserEngraveYSpeed_2=10.000000 LaserEngraveYAcc_2=100.000000 LaserEngraveSFOffsetX_2=0.120000 LaserEngraveSFOffsetY_2=0.000000 LaserEngraveMinSpeed_3=450.000000 LaserEngraveMaxSpeed_3=550.000000 LaserEngraveBufferLen_3=25.000000 LaserEngraveChangeDirGap_3=-0.270000 LaserEngraveStartVel_3=45.000000 LaserEngraveAcc_3=6000.000000 LaserEngraveYSpeed_3=10.000000 LaserEngraveYAcc_3=100.000000 LaserEngraveSFOffsetX_3=0.135000 LaserEngraveSFOffsetY_3=0.000000 LaserEngraveMinSpeed_4=550.000000 LaserEngraveMaxSpeed_4=1000.000000 LaserEngraveBufferLen_4=25.000000 LaserEngraveChangeDirGap_4=-0.300000 LaserEngraveStartVel_4=45.000000 LaserEngraveAcc_4=6000.000000 LaserEngraveYSpeed_4=10.000000 LaserEngraveYAcc_4=100.000000 LaserEngraveSFOffsetX_4=0.150000 LaserEngraveSFOffsetY_4=0.000000 LaserEngraveMinSpeed_5=550.000000 LaserEngraveMaxSpeed_5=650.000000 LaserEngraveBufferLen_5=25.000000 LaserEngraveChangeDirGap_5=0.000000 LaserEngraveStartVel_5=45.000000 LaserEngraveAcc_5=6000.000000 LaserEngraveYSpeed_5=10.000000 LaserEngraveYAcc_5=100.000000 LaserEngraveSFOffsetX_5=0.000000 LaserEngraveSFOffsetY_5=0.000000 LaserEngraveMinSpeed_6=650.000000 LaserEngraveMaxSpeed_6=750.000000 LaserEngraveBufferLen_6=25.000000 LaserEngraveChangeDirGap_6=0.000000 LaserEngraveStartVel_6=45.000000 LaserEngraveAcc_6=6000.000000 LaserEngraveYSpeed_6=10.000000 LaserEngraveYAcc_6=100.000000 LaserEngraveSFOffsetX_6=0.000000 LaserEngraveSFOffsetY_6=0.000000 LaserEngraveMinSpeed_7=750.000000 LaserEngraveMaxSpeed_7=850.000000 LaserEngraveBufferLen_7=25.000000 LaserEngraveChangeDirGap_7=0.000000 LaserEngraveStartVel_7=45.000000 LaserEngraveAcc_7=6000.000000 LaserEngraveYSpeed_7=10.000000 LaserEngraveYAcc_7=100.000000 LaserEngraveSFOffsetX_7=0.000000 LaserEngraveSFOffsetY_7=0.000000 LaserEngraveMinSpeed_8=850.000000 LaserEngraveMaxSpeed_8=1000.000000 LaserEngraveBufferLen_8=25.000000 LaserEngraveChangeDirGap_8=0.000000 LaserEngraveStartVel_8=45.000000 LaserEngraveAcc_8=6000.000000 LaserEngraveYSpeed_8=10.000000 LaserEngraveYAcc_8=100.000000 LaserEngraveSFOffsetX_8=0.000000 LaserEngraveSFOffsetY_8=0.000000 [TECHNICS_LASERHITPOINT] CreateTechnicsCodeName=激光打孔 TechnicsCfgType=0 LaserHitPointCoordSysOID=0 LaserHitPointWorkPower=60.000000 LaserHitPointFrequency=20000 LaserHitPointOptimizePathType=1 LaserHitPointDownToUpper=0 LaserHitPointInnerToOuter=1 LaserHitPointBlockHeight=150.000000 LaserHitPointAutoSetPathDir=1 LaserHitPointDisperseLength=0.050000 LaserHitPointType=1 LaserHitPointGapLength=2.000000 LaserHitPointDelayTime=0.100000 LaserHitPointBlowGasType=1 LaserHitPointWorkPower2=50.000000 LaserHitPointStartPosType=0 LaserHitPointOpenLaserDelayTime=0.000000 [TECHNICS_LASERGRADEENGRAVE] CreateTechnicsCodeName=激光坡度雕刻 TechnicsCfgType=0 LaserGradeEngraveCoordSysOID=0 LaserGradeEngravePower=100.000000 LaserGradeEngraveStartPower=10.000000 LaserGradeEngraveFrequency=20000 LaserGradeEngraveSpeed=50.000000 LaserGradeEngraveBlowGasType=1 LaserGradeEngraveTwoDirector=1 LaserGradeEngraveScanStepLen=1.000000 LaserGradeEngraveGradeWidth=2.000000 LaserGradeEngraveGradeNumber=32 LaserGradeEngraveNeedRepairGrade=0 LaserGradeEngraveStartRepairGrade=0.200000 LaserGradeEngraveCfgNumber=5 LaserGradeEngraveMinSpeed_0=0.000000 LaserGradeEngraveMaxSpeed_0=150.000000 LaserGradeEngraveBufferLen_0=25.000000 LaserGradeEngraveChangeDirGap_0=0.000000 LaserGradeEngraveStartVel_0=45.000000 LaserGradeEngraveAcc_0=6000.000000 LaserGradeEngraveYSpeed_0=10.000000 LaserGradeEngraveYAcc_0=100.000000 LaserGradeEngraveSFOffsetX_0=0.000000 LaserGradeEngraveSFOffsetY_0=0.000000 LaserGradeEngraveMaxSpeed=1000.000000 LaserGradeEngraveScanDirector=0 LaserGradeEngraveMinSpeed_1=150.000000 LaserGradeEngraveMaxSpeed_1=250.000000 LaserGradeEngraveBufferLen_1=25.000000 LaserGradeEngraveChangeDirGap_1=0.000000 LaserGradeEngraveStartVel_1=45.000000 LaserGradeEngraveAcc_1=6000.000000 LaserGradeEngraveYSpeed_1=10.000000 LaserGradeEngraveYAcc_1=100.000000 LaserGradeEngraveSFOffsetX_1=0.000000 LaserGradeEngraveSFOffsetY_1=0.000000 LaserGradeEngraveMinSpeed_2=250.000000 LaserGradeEngraveMaxSpeed_2=350.000000 LaserGradeEngraveBufferLen_2=25.000000 LaserGradeEngraveChangeDirGap_2=0.000000 LaserGradeEngraveStartVel_2=45.000000 LaserGradeEngraveAcc_2=6000.000000 LaserGradeEngraveYSpeed_2=10.000000 LaserGradeEngraveYAcc_2=100.000000 LaserGradeEngraveSFOffsetX_2=0.000000 LaserGradeEngraveSFOffsetY_2=0.000000 LaserGradeEngraveMinSpeed_3=350.000000 LaserGradeEngraveMaxSpeed_3=450.000000 LaserGradeEngraveBufferLen_3=25.000000 LaserGradeEngraveChangeDirGap_3=0.000000 LaserGradeEngraveStartVel_3=45.000000 LaserGradeEngraveAcc_3=6000.000000 LaserGradeEngraveYSpeed_3=10.000000 LaserGradeEngraveYAcc_3=100.000000 LaserGradeEngraveSFOffsetX_3=0.000000 LaserGradeEngraveSFOffsetY_3=0.000000 LaserGradeEngraveMinSpeed_4=450.000000 LaserGradeEngraveMaxSpeed_4=550.000000 LaserGradeEngraveBufferLen_4=25.000000 LaserGradeEngraveChangeDirGap_4=0.000000 LaserGradeEngraveStartVel_4=45.000000 LaserGradeEngraveAcc_4=6000.000000 LaserGradeEngraveYSpeed_4=10.000000 LaserGradeEngraveYAcc_4=100.000000 LaserGradeEngraveSFOffsetX_4=0.000000 LaserGradeEngraveSFOffsetY_4=0.000000 [TechnicsOrign] StopPosition=9 ResponseEvent=1 [textdefault] FontHeight=10 FontSpace=.8 text=Out FontName=Georgia IsTrueType=1 mainShxName=txt subShxName=NULL [MainAxisSpeed] MainAxisDefaultIndex=0 [FileFormatCfg_ECP] MaxCurveNumber=1500 [LayerManager] HideNoOutputLayer=0 ApplyAllLayerAttrib=1 [FileFormatCfg_map] MaxCurveNumber=1500 [TECHNICS_PENCUT] CreateTechnicsCodeName=无名 TechnicsCfgType=0 PenCutCoordSysOID=0 PenCutOptimizePathType=1 PenCutInnerToOuter=1 PenCutDownToUpper=0 PenCutBlockHeight=150.000000 PenCutAutoSetPathDir=1 PenCutCicleMinSegNumber=36 PenCutDisperseLength=0.050000 PenCutCloseGapLength=0.000000 PenCutOverlapLength=0.000000 PenCutAdjustForClose=0 PenCutQXEnterLength=1.000000 PenCutDelayDownTime=0.000000 PenCutDelayUpTime=0.000000 PenCutOneAxisBackLashLength=0.000000 PenCutTwoAxisBackLashLength=0.000000 PenCutSpeed=75.000000 PenCutGWAcc=3000.000000 PenCutGWTime=0.010000 PenCutTrackSize=100 PenCutOffsetX=0.000000 PenCutOffsetY=0.000000 PenCutCtrolMode=0 PenCutCircleSpeedNum=0 [TECHNICS_KNIFECUT] KnifeCutDownSpeed=20 [TechcisMode] SupportMachineEngrave=0 [CreateTextCmd] SupportReverse=0 Convert2Curve=1 [FileFormatCfg_dxf] MaxCurveNumber=1500 [ArrayCopyCmd] SupportSPath=1 CenterAlign=0 [DaHen] NeedSetChangePower=0 StartPower=0 ChangePowerPoint=0 ChangeFrq=0 [AutoCalLeadInAndOutTrack] AdjustStartPointToConner=0 MinInflectionAngle=45.000000 MinInflectionLength=20.000000 OverLapLength=0.000000 ReserveBlockType=1 MinInterDistance=1.000000 InLeadLineType=0 InLeadLineLength=2.500000 InLeadLineAngle=45.000000 OutLeadLineType=0 OutLeadLineLength=2.500000 OutLeadLineAngle=45.000000 AutoAdjustStartPos=1 AutoAdjustStartPosToMidLine=1 KnifeGapOffset=0.000000 OffsetType=1 GetDataByLayer=0 AutoCheckDataRight=0 AutoCheckIntersect=0 AutoCheckTimes=2 MaxLeadLineLen=10.0 [CreateGroupCmd] ChangeToFirstLayer=1 [ImportFileAdjustData] AdjustCircleMode=0 CircleRadius=5.0000000000 [HALF_BMP] DotSize=1 ScanStep=0.01 [AddInOutLead] UseLineConnect=0 LineConnectLength=0.0 LineConnectAngle=0.0 InType=0 InArcRadius=2.0 InLineLength=.5 InAngle=0.00 OutType=0 OutArcRadius=2.0 OutLineLength=.5 OutAngle=0.00 StartDir=1 OverLapLength=0.00 StartDirType=0 CloseType=0 Valid=0 [CreateLineCmd] length=1 direct=0

syscfgWolverine.ini

[Technics] CreateTechnicsCodeNumber=6 CreateTechnicsCodeDefaultMode=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_LINE=TECHNICS_UNKOWN CreateTechnicsCodeDefaultMode_IMAGE=TECHNICS_UNKOWN TechnicsDefaultType=0 CreateTechnicsCodeDefaultMode_16711680=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_0=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_255=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_33023=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_65280=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_32768=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_16776960=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_12615935=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_5987163=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_3421236=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_65535=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_16636309=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_7697781=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_12615680=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_1048455=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_3499673=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_8421376=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_10263708=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_4194368=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_8388736=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_8388863=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_5131854=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_8323072=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_12615808=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_8421440=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_8388672=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_10027161=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_32639=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_11974326=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_6842472=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_8553090=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_16751001=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_16751052=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_3394764=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_8421504=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_11119017=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_2565927=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_9408399=TECHNICS_LASERCUT [CreateTechnicsCode_0] CreateTechnicsCodeName=TECHNICS_LASERCUT [CreateTechnicsCode_1] CreateTechnicsCodeName=TECHNICS_LASERENGRAVE [CreateTechnicsCode_2] CreateTechnicsCodeName=TECHNICS_LASERGRADEENGRAVE [CreateTechnicsCode_3] CreateTechnicsCodeName=TECHNICS_LASERHITPOINT [CreateTechnicsCode_4] CreateTechnicsCodeName=TECHNICS_PENCUT [CreateTechnicsCode_5] CreateTechnicsCodeName=TECHNICS_KNIFECUT [CompanyInfo] TelPhone=Telepnone: SoftName=Lasercut5.3 CompanyName=G Http=www...com PrinterName=Lasercut(Leetro) [ApplicationSetting] OutPutWorkFile=1 FlashDelayTime=10 UserHighConfige=1 ShowDebugWndMsg=0 MainFaceType=0 Mpc05PortNumber=1 SelectOut=0 ShowHandle=1 BackColorRed=210 BackColorGreen=255 BackColorBlue=255 PromptRevise=0 OutputPLTPath=c:\Data.PLT LaserCutForSteel=0 LimitWorkTimes=-1 HideChineseButton=0 TipPreWorkTime=0 EcYXAxisType=0 PrintMode=1 [IMPORTFILE] PREFILEMODE=0 NeedSuckPoint=0 SuckPointTol=0.0 ShowMinPointSize=0.0 ShowMaxPointSize=100.0 CENTERDATA=1 UnitType=0 SysPointDefaultSize=1.0 SysDXFReadPointType=0 SysDXFMaxLength=2000 SysDXFMaxWidth=2000 SysDXFMaxHeight=100 DXFCalBasicPrecision=0.5 DXFNeedCalDataBound=0 MTextTrueTypeSpaceScale=0.25 MTextShxSpaceScale=0.35 AdjustDirect=0 clockwise=1 UseDifferentColor=1 InnerColor=8388863 OutColor=4227072 [MAPARRAY] MoveData=1 [TableSetting] TableGridWidth=50 TableGridHeight=50 [MotionCard_0] MotionCard_Name=Step03Card [Step03Card_0] MotionCardName=Step-servo Co.,Ltd ValidIOLevel=0 ValidLimitLevel=0 LaserPowerMode=0 LaserDefaultPulse=25000 AxisPulseOutputMode=0 AxisPulseOutputLogic=0 ChecHomeIOType=0 CardVer=LH OpenCardTipMsg=0 GradeEngraveType=3 LaserMaxPower=100 CardMinVer=1 LaserPowerTableNumber=20 LaserPowerTable_0=0 LaserPowerTable_5=5 LaserPowerTable_10=10 LaserPowerTable_15=15 LaserPowerTable_20=20 LaserPowerTable_25=25 LaserPowerTable_30=30 LaserPowerTable_35=35 LaserPowerTable_40=40 LaserPowerTable_45=45 LaserPowerTable_50=50 LaserPowerTable_55=55 LaserPowerTable_60=60 LaserPowerTable_65=65 LaserPowerTable_70=70 LaserPowerTable_75=75 LaserPowerTable_80=80 LaserPowerTable_85=85 LaserPowerTable_90=90 LaserPowerTable_95=95 LaserPowerTable_100=100 LaserLowerPulse=1000 LaserLowerPower=0.1 LaserPowerRepairPower=0 TJCardNumber=1 TJCARD_NUMBER_0=1f00001f YEncodeRate=10000.000000 YSpdIncrease=300.000000 XEncodeRate=10000.000000 XSpdIncrease=300.000000 YScaleCtrl=5.000000 YIntegralCtrl=0.011500 YDiffCtrl=0.002875 XScaleCtrl=5.000000 XIntegralCtrl=0.011500 XDiffCtrl=0.002875 YScaleCtrlii=5.000000 XScaleCtrlii=5.000000 YZero=0.000000 XZero=0.000000 YIntegralUpLev=100.000000 XIntegralUpLev=100.000000 DaLimY=0.500000 DaLimX=0.500000 WaterProtected=0 ZMoveType=0 CanContinueForEngrave=0 SaveBreakTime=0.1 [Step03LXCard_0] MotionCardName=Step-servo Co.,Ltd ValidIOLevel=0 ValidLimitLevel=0 LaserPowerMode=0 LaserDefaultPulse=25000 AxisPulseOutputMode=1 AxisPulseOutputLogic=0 ChecHomeIOType=0 CardVer=LX OpenCardTipMsg=0 GradeEngraveType=3 CardMinVer=1 LaserMaxPower=100 LaserPowerTableNumber=20 LaserPowerTable_0=0 LaserPowerTable_5=5 LaserPowerTable_10=10 LaserPowerTable_15=15 LaserPowerTable_20=20 LaserPowerTable_25=25 LaserPowerTable_30=30 LaserPowerTable_35=35 LaserPowerTable_40=40 LaserPowerTable_45=45 LaserPowerTable_50=50 LaserPowerTable_55=55 LaserPowerTable_60=60 LaserPowerTable_65=65 LaserPowerTable_70=70 LaserPowerTable_75=75 LaserPowerTable_80=80 LaserPowerTable_85=85 LaserPowerTable_90=90 LaserPowerTable_95=95 LaserPowerTable_100=100 LaserLowerPulse=0 LaserLowerPower=0 TestCardNumber=1 SupportArcMove=0 SupportBezierMove=0 ConAccStartSpeed=200.0 MaxTrackNumInBuffer=500 ChangLaserIONumber=0 [Setup] ShortCutTip=LaserCut 5.3 ExecuteFileName = LaserCut53.exe TipSetupChineseLanguage=1 SetUpType=0 AutoCADTip=AutoCAD CoreDrawTip=CorelDraw LaserCutTip=LaserCut53 InstallPath=C:\LaserCut53 [ONEAXIS_DEFAULT] CoordSystem_Name=单轴 SysOutputIOOID_1=-1 SysOutputIOOID_2=-1 OutputIOValue_1=-1 OutputIOValue_2=-1 SysAxisOID=1 OnePulseMoveLength=0.00078125 TableLength=150 TableMinPosition=0 TableMaxPosition=150 OriginDirector=-1 OriginPosition=0 GoOriginSpeed=2 OriginOffsetLen=1.5 NeedRevise=0 StartSpeed=0.5 WorkAcc=100 HandFastMoveSpeed = 15 HandSlowMoveSpeed = 1 [TWOAXIS_DEFAULT] CoordSystem_Name=两轴 SysOutputIOOID_1=-1 SysOutputIOOID_2=-1 OneAxisSysOID=0 TwoAxisSysOID=1 OneAxisOnePulseMoveLength=0.004843750000000 TwoAxisOnePulseMoveLength=0.004843750000000 OneAxisTableLength=1000.000000 TwoAxisTableLength=600.000000 OneAxisTableMinPosition=0.000000 OneAxisTableMaxPosition=1000.000000 TwoAxisTableMinPosition=0.000000 TwoAxisTableMaxPosition=600.000000 OneAxisOriginDirector=-1 TwoAxisOriginDirector=1 OneAxisOriginPosition=0.000000 TwoAxisOriginPosition=600.000000 OneAxisGoOriginSpeed=15.000000 TwoAxisGoOriginSpeed=15.000000 NeedRevise=0 StartSpeed=10.000000 WorkAcc=1200.000000 SpaceSpeed=300.000000 ConstantSpeed=10.000000 HandFastMoveSpeed=200.000000 HandSlowMoveSpeed=50.000000 OneAxisBackLashLength=0.0 TwoAxisBackLashLength=0.0 [CoordSystem_0] CoordSystem_Type=TWOAXIS [CoordSystem_1] CoordSystem_Type=ONEAXIS [CoordSystem_2] CoordSystem_Type=THREEAXIS [TWOAXIS_0] CoordSystem_Name=工作台 SysOutputIOOID_1=-1 SysOutputIOOID_2=-1 OneAxisSysOID=0 TwoAxisSysOID=1 OneAxisOnePulseMoveLength=0.004800000000000 TwoAxisOnePulseMoveLength=0.004800000000000 OneAxisTableLength=1200.000000 TwoAxisTableLength=900.000000 OneAxisTableMinPosition=0.000000 OneAxisTableMaxPosition=1200.000000 TwoAxisTableMinPosition=0.000000 TwoAxisTableMaxPosition=900.000000 OneAxisOriginDirector=1 TwoAxisOriginDirector=1 OneAxisOriginPosition=1200.000000 TwoAxisOriginPosition=900.000000 OneAxisGoOriginSpeed=150.000000 TwoAxisGoOriginSpeed=150.000000 OneAxisOriginOffsetLen=5 TwoAxisOriginOffsetLen=5 NeedRevise=1 StartSpeed=5.000000 WorkAcc=500.000000 SpaceSpeed=150.000000 ConstantSpeed=8.000000 HandFastMoveSpeed=200.000000 HandSlowMoveSpeed=160.000000 OneAxisOverLapLength=0.000000 WorkAcc2=700.000000 SupportTwoXAxis=0 TwoXAxisOffsetY2=0 OneAxisOnePulseMoveLength2=0.00484375 TwoXAxisPulseMoveLen=0.0062320000 TwoXAxisReduceLen=70 ParkStartSpeedScale=1.0 ParkAccScale=1.0 ParkSpeedScale=1.0 WorkAccAcc=15000.000000 SpaceAccAcc=15000.000000 XAxisMaxChangeSpeed=10.000000 YAxisMaxChangeSpeed=10.000000 SupportTwoLaser=0 TwoLaserSpaceLength=0.000000 [ONEAXIS_1] CoordSystem_Name=转料 SysOutputIOOID_1=-1 SysOutputIOOID_2=-1 SysAxisOID=2 OnePulseMoveLength=0.001250000000000 TableLength=380.000000 TableMinPosition=0.000000 TableMaxPosition=380.000000 OriginDirector=1 OriginPosition=380.000000 GoOriginSpeed=0.000000 OriginOffsetLen=7.500000 NeedRevise=0 WorkAcc=15.000000 HandFastMoveSpeed =15.000000 HandSlowMoveSpeed =10.000000 StartSpeed=5.000000 SpaceSpeed=10.000000 WorkAccAcc=20000.000000 SpaceAccAcc=80000.000000 AxisMaxChangeSpeed=30.000000 [HandMoveCoordSystem_DEFAULT] HandMoveAxis1Increase=-1 HandMoveAxis1Reduce=-1 HandMoveAxis2Increase=-1 HandMoveAxis2Reduce=-1 HandMoveAxis3Increase=-1 HandMoveAxis3Reduce=-1 HandMoveSpeed=-1 HandMoveStepOrContinue=-1 [Technics_Laser_Data] ExportRows=1 ExportColumns=1 ExportRowSpace=0.00000 ExportColumnSpace=0.00000 ExportRowCW=0.00000 ExportColumnCW=0.00000 DrawArrayDataType=1 LogicOrgPostionType=1 ArrayExportOrder=1 ArrayExportXOrder=1 ArrayExportYOrder=1 AtOnceExport=1 OutputTimes=1 DelayTime=0 FeedLength=0.000000 FeedSpeed=5.000000 MachineHasWorkMinute=12104 FeedDelayTime=0 ChangeSerialNo=0 OuputLayerOrderType=1 IsTwoLaserWorking=1 [LaserSimulateSpeedScale] SimulateSpeedScaleNumber = 3 SimulateSpeed0_Min=0 SimulateSpeed0_Max=100 SimulateSpeed0_Scale=1 SimulateSpeed1_Min=100 SimulateSpeed1_Max=500 SimulateSpeed1_Scale=1 SimulateSpeed2_Min=500 SimulateSpeed2_Max=5000 SimulateSpeed2_Scale=1 [MACHINE_MODIFYCFG] LASER_MODIFYCFG_SAVEPASSWORD=1 LASER_MODIFYCFG_PASSWORD=0 [RUNTIMECFG] OneCoordSys_ONEAXIS_PULSE=1600 OneCoordSys_ONEAXIS_LENGTH=0.000000 TwoCoordSys_ONEAXIS_PULSE=5000 TwoCoordSys_ONEAXIS_LENGTH=24.000000 TwoCoordSys_TWOAXIS_PULSE=5000 TwoCoordSys_TWOAXIS_LENGTH=24.000000 IMPORTFILE_CENTERDATA=1 CombineLine_TOL=0.100000 SmoothLine_JB=1 AdjustStartPt=0 NeedPartWorkCtrol=0 StartWorkDelayTime=0 NeedControlMainAxis=0 OverWorkDelayTime=0 TwoCoordSys_TWOAXIS_PULSE2=5000 TwoCoordSys_TWOAXIS_LENGTH2=50 [ResourceManager] CreateDefaultLanguageFile=0 [GEOMETRY] SupportARC=0 [FileFormatCfg_dst] MaxCurveNumber=1500 MustCloseBlock=1 SmoothTol=0.500000 [FileFormatCfg_plt] MaxCurveNumber=1500 DrawPLTUnit=1016.000000 [FileFormatCfg_ai] MaxCurveNumber=1400 [FileFormatCfg_eps] MaxCurveNumber=1400 [FileFormatCfg_bmp] MaxCurveNumber=1400 [Laser] AutoSimulateSpeed=15 [DataCheck] overlap=1 selfinter=1 close=1 intersection=1 overlaptol=0.01 lineinterTol=0 interwithleadline=1 CheckLayerCode=-1 [COREDRAW_CAD] MustCalSecondFile=1 [OFFSETCFG] OffsetDist=0.100000 OffsetType=0 OffsetTolerance=0.200000 MinPointNum=6 Offset=1 connect=1 [LASERCAD] GetEntitiesType=0 [MachineControl] MachineMotionCardNumber = 1 MachineAXISNumber = 3 MachineInputIONumber=17 MachineOutputIONumber=10 CoordSystemNumber =2 MainCoordSystemID = 0 FeedCoordSystemOID=1 TestMoveLength=50.000000 TestLaserPower=10.000000 StartCmdDoPause=0 MachineInputIODelay=3 ClickLaserTime=0.1 ApplicationLimitType=10 TestOpenLaserType=0 ThreadWorkMode=1 PerWorkTimesApplyHardHome=0 LoopAppylHomeType=1 AtOnceExport=0 ClipBoxPower=40.000000 ClipBoxOffsetLen=2.000000 ClipBoxSpeed=25.000000 RunBoxConnerAcc=100 NeedAlign=0 PerWorkMustGoLogicHome=1 AfterGoHomeToLogicHome=0 TestIsSlowSpeed=0 ClipBoxPower2=40.000000 RunMustDatum=0 AlignMachineZPos=0.000000 LogicOrgPositionX=600.000000 LogicOrgPositionY=314.120000 NeedOutput530=0 SupportSplitBlockOutPut=0 ZAxisForLaserFocus=0 FeedAxisGoHome=0 NeedContinueTipForBlock=0 [MotionAxis_0] MotionCard_Index=0 MotionCard_axisOID=4 [MotionAxis_1] MotionCard_Index=0 MotionCard_axisOID=3 [MotionAxis_2] MotionCard_Index=0 MotionCard_axisOID=2 [MotionInputIO_0];X加 MotionCard_Index=0 MotionCard_InputIOOID=38 [MotionInputIO_1];X减 MotionCard_Index=0 MotionCard_InputIOOID=46 [MotionInputIO_2];Y加 MotionCard_Index=0 MotionCard_InputIOOID=40 [MotionInputIO_3];Y减 MotionCard_Index=0 MotionCard_InputIOOID=36 [MotionInputIO_4];开始 MotionCard_Index=0 MotionCard_InputIOOID=44 [MotionInputIO_5];暂停 MotionCard_Index=0 MotionCard_InputIOOID=8 [MotionInputIO_6];停止 MotionCard_Index=0 MotionCard_InputIOOID=12 [MotionInputIO_7];按键快慢 MotionCard_Index=0 MotionCard_InputIOOID=1 [MotionInputIO_8];步进/连续 MotionCard_Index=0 MotionCard_InputIOOID=1 [MotionInputIO_9];Z加 MotionCard_Index=0 MotionCard_InputIOOID=29 [MotionInputIO_10];Z减 MotionCard_Index=0 MotionCard_InputIOOID=31 [MotionInputIO_11];回原点 MotionCard_Index=0 MotionCard_InputIOOID=10 [MotionInputIO_12];走边框 MotionCard_Index=0 MotionCard_InputIOOID=42 [MotionInputIO_13];激光点射 MotionCard_Index=0 MotionCard_InputIOOID=27 [MotionInputIO_14];XYZ对刀 MotionCard_Index=0 MotionCard_InputIOOID=-1 [MotionInputIO_15];Z轴对刀 MotionCard_Index=0 MotionCard_InputIOOID=-1 [MotionInputIO_16];盖盖保护 MotionCard_Index=0 MotionCard_InputIOOID=-1 [HandMoveCoordSystem_0] HandMoveAxis1Increase=0 HandMoveAxis1Reduce=1 HandMoveAxis2Increase=2 HandMoveAxis2Reduce=3 HandMoveSpeed=7 HandMoveStepOrContinue=8 HandMoveAxis3Increase=-1 HandMoveAxis3Reduce=-1 [HandMoveCoordSystem_1] HandMoveAxis1Increase=9 HandMoveAxis1Reduce=10 HandMoveSpeed=7 HandMoveStepOrContinue=8 HandMoveAxis2Increase=-1 HandMoveAxis2Reduce=-1 HandMoveAxis3Increase=-1 HandMoveAxis3Reduce=-1 [MotionOutputIO_0];激光开关 MotionCard_Index=0 MotionCard_OutputIOOID=15 [MotionOutputIO_1];功率调整 MotionCard_Index=0 MotionCard_OutputIOOID=18 [MotionOutputIO_2];吹气信号 MotionCard_Index=0 MotionCard_OutputIOOID=150 [MotionOutputIO_3];正在加工，输出的信号 MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_4];随动 MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_5];工作台切换 MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_6]; MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_7];光闸 MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_8];激光 MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_9] MotionCard_Index=0 MotionCard_OutputIOOID=-1 [TECHNICS_LASERCUT] CreateTechnicsCodeName=激光切割 TechnicsCfgType=0 LaserCutCoordSysOID=0 LaserCutConnerPower=70.000000 LaserCutWorkPower=100.000000 LaserCutFrequency=3500 LaserCutOptimizePathType=1 LaserCutInnerToOuter=1 LaserCutDownToUpper=0 LaserCutBlockHeight=150.000000 LaserCutAutoSetPathDir=1 LaserCutCicleMinSegNumber=36 LaserCutDisperseLength=0.020000 LaserCutCloseGapLength=0.000000 LaserCutOverlapLength=0.000000 LaserCutAdjustForClose=1 LaserCutQXEnterLength=0.000000 LaserCutDelayMoveTime=0.000000 LaserCutOpenLaserDelayTime=0.000000 LaserCutCloseLaserDelayTime=0.000000 LaserCutOneAxisBackLashLength=0.000000 LaserCutTwoAxisBackLashLength=0.010000 LaserCutBlowGasType=2 LaserCutAheadBlowGasTimes=0.000000 LaserCutNoCloseGasTimes=0.000000 LaserCutSpeed=25.000000 LaserCutGWAcc=100.000000 LaserCutCircleSpeedNum=0 LaserCutCircleSpeed0_MinR=0.000000 LaserCutCircleSpeed0_MaxR=0.550000 LaserCutCircleSpeed0_Speed=10.000000 LaserCutCircleSpeed1_MinR=0.550000 LaserCutCircleSpeed1_MaxR=1.050000 LaserCutCircleSpeed1_Speed=15.000000 LaserCutCircleSpeed2_MinR=1.050000 LaserCutCircleSpeed2_MaxR=1.550000 LaserCutCircleSpeed2_Speed=25.000000 LaserCutCircleSpeed3_MinR=1.550000 LaserCutCircleSpeed3_MaxR=2.050000 LaserCutCircleSpeed3_Speed=30.000000 LaserCutCircleSpeed4_MinR=2.050000 LaserCutCircleSpeed4_MaxR=3.050000 LaserCutCircleSpeed4_Speed=35.000000 LaserCutCircleSpeed5_MinR=3.050000 LaserCutCircleSpeed5_MaxR=4.050000 LaserCutCircleSpeed5_Speed=40.000000 LaserCutGWTime=0.010000 LaserCutTrackSize=100 LaserCutMaxSpeed=400.000000 LaserCutConnerPower2=30.000000 LaserCutWorkPower2=50.000000 LaserCutInnerToOuter2=0 LaserCutStartPosType=0 LaserCutDelayTimeAfterCloseLaser=0.000000 LaserCutBackLashAddSpaceLength=8.000000 LaserCutLineLength=0.000000 SpaceCutLineLength=0.000000 bSpaceLineFirst=0 LaserCutAdjustMove=0 LaserCutAdjustMoveDelay=0.000000 LaserCutUpLen=0.000000 LaserCutDisperseMinLength=0.02 LaserCutOpenGZDelayTime=0.000000 LaserCutSpeedScale1=1.0 LaserCutSpeedScale2=1.0 LaserCutSpeedScale3=1.0 LaserCutSpeedScale4=1.0 LaserCutSpeedScale5=1.0 LaserCutSpeedScale6=1.0 LaserCutSpeedScale7=1.0 LaserCutSpeedScale8=1.0 AdjustStartPointToConner=0 SplitCircleForBY=0 AdjustMoveType=0 WaitInputIODelayTime=5 RepeatOpenLaserTimes=0 SupportAIOutput=0 [TECHNICS_LASERENGRAVE] CreateTechnicsCodeName=激光雕刻 TechnicsCfgType=0 LaserEngraveCoordSysOID=0 LaserEngravePower=50.000000 LaserEngraveFrequency=550 LaserEngraveSpeed=700.000000 LaserEngraveBlowGasType=1 LaserEngraveFillCircleR=2.500000 LaserEngraveFillCircleSpace=2.500000 LaserEngraveFillCircle=0 LaserEngraveTwoDirector=1 LaserEngraveScanStepLen=0.150000 LaserEngraveCfgNumber=5 LaserEngraveMinSpeed_0=0.000000 LaserEngraveMaxSpeed_0=250.000000 LaserEngraveBufferLen_0=25.000000 LaserEngraveChangeDirGap_0=-0.170000 LaserEngraveStartVel_0=45.000000 LaserEngraveAcc_0=6000.000000 LaserEngraveYSpeed_0=10.000000 LaserEngraveYAcc_0=100.000000 LaserEngraveSFOffsetX_0=0.085000 LaserEngraveSFOffsetY_0=0.000000 LaserEngraveExpandPenWidth=0 LaserEngraveExpandPenWidthScale=15.000000 LaserEngraveFillCircleType=0 LaserEngraveMaxSpeed=1000.000000 LaserEngravePower2=60.000000 LaserEngraveScanDirector=0 LaserEngraveMinSpeed_1=250.000000 LaserEngraveMaxSpeed_1=350.000000 LaserEngraveBufferLen_1=25.000000 LaserEngraveChangeDirGap_1=-0.200000 LaserEngraveStartVel_1=45.000000 LaserEngraveAcc_1=6000.000000 LaserEngraveYSpeed_1=10.000000 LaserEngraveYAcc_1=100.000000 LaserEngraveSFOffsetX_1=0.100000 LaserEngraveSFOffsetY_1=0.000000 LaserEngraveMinSpeed_2=350.000000 LaserEngraveMaxSpeed_2=450.000000 LaserEngraveBufferLen_2=25.000000 LaserEngraveChangeDirGap_2=-0.240000 LaserEngraveStartVel_2=45.000000 LaserEngraveAcc_2=6000.000000 LaserEngraveYSpeed_2=10.000000 LaserEngraveYAcc_2=100.000000 LaserEngraveSFOffsetX_2=0.120000 LaserEngraveSFOffsetY_2=0.000000 LaserEngraveMinSpeed_3=450.000000 LaserEngraveMaxSpeed_3=550.000000 LaserEngraveBufferLen_3=25.000000 LaserEngraveChangeDirGap_3=-0.270000 LaserEngraveStartVel_3=45.000000 LaserEngraveAcc_3=6000.000000 LaserEngraveYSpeed_3=10.000000 LaserEngraveYAcc_3=100.000000 LaserEngraveSFOffsetX_3=0.135000 LaserEngraveSFOffsetY_3=0.000000 LaserEngraveMinSpeed_4=550.000000 LaserEngraveMaxSpeed_4=1000.000000 LaserEngraveBufferLen_4=25.000000 LaserEngraveChangeDirGap_4=-0.300000 LaserEngraveStartVel_4=45.000000 LaserEngraveAcc_4=6000.000000 LaserEngraveYSpeed_4=10.000000 LaserEngraveYAcc_4=100.000000 LaserEngraveSFOffsetX_4=0.150000 LaserEngraveSFOffsetY_4=0.000000 LaserEngraveMinSpeed_5=550.000000 LaserEngraveMaxSpeed_5=650.000000 LaserEngraveBufferLen_5=25.000000 LaserEngraveChangeDirGap_5=0.000000 LaserEngraveStartVel_5=45.000000 LaserEngraveAcc_5=6000.000000 LaserEngraveYSpeed_5=10.000000 LaserEngraveYAcc_5=100.000000 LaserEngraveSFOffsetX_5=0.000000 LaserEngraveSFOffsetY_5=0.000000 LaserEngraveMinSpeed_6=650.000000 LaserEngraveMaxSpeed_6=750.000000 LaserEngraveBufferLen_6=25.000000 LaserEngraveChangeDirGap_6=0.000000 LaserEngraveStartVel_6=45.000000 LaserEngraveAcc_6=6000.000000 LaserEngraveYSpeed_6=10.000000 LaserEngraveYAcc_6=100.000000 LaserEngraveSFOffsetX_6=0.000000 LaserEngraveSFOffsetY_6=0.000000 LaserEngraveMinSpeed_7=750.000000 LaserEngraveMaxSpeed_7=850.000000 LaserEngraveBufferLen_7=25.000000 LaserEngraveChangeDirGap_7=0.000000 LaserEngraveStartVel_7=45.000000 LaserEngraveAcc_7=6000.000000 LaserEngraveYSpeed_7=10.000000 LaserEngraveYAcc_7=100.000000 LaserEngraveSFOffsetX_7=0.000000 LaserEngraveSFOffsetY_7=0.000000 LaserEngraveMinSpeed_8=850.000000 LaserEngraveMaxSpeed_8=1000.000000 LaserEngraveBufferLen_8=25.000000 LaserEngraveChangeDirGap_8=0.000000 LaserEngraveStartVel_8=45.000000 LaserEngraveAcc_8=6000.000000 LaserEngraveYSpeed_8=10.000000 LaserEngraveYAcc_8=100.000000 LaserEngraveSFOffsetX_8=0.000000 LaserEngraveSFOffsetY_8=0.000000 [TECHNICS_LASERHITPOINT] CreateTechnicsCodeName=激光打孔 TechnicsCfgType=0 LaserHitPointCoordSysOID=0 LaserHitPointWorkPower=60.000000 LaserHitPointFrequency=20000 LaserHitPointOptimizePathType=1 LaserHitPointDownToUpper=0 LaserHitPointInnerToOuter=1 LaserHitPointBlockHeight=150.000000 LaserHitPointAutoSetPathDir=1 LaserHitPointDisperseLength=0.050000 LaserHitPointType=1 LaserHitPointGapLength=2.000000 LaserHitPointDelayTime=0.100000 LaserHitPointBlowGasType=1 LaserHitPointWorkPower2=50.000000 LaserHitPointStartPosType=0 LaserHitPointOpenLaserDelayTime=0.000000 [TECHNICS_LASERGRADEENGRAVE] CreateTechnicsCodeName=激光坡度雕刻 TechnicsCfgType=0 LaserGradeEngraveCoordSysOID=0 LaserGradeEngravePower=16.000000 LaserGradeEngraveStartPower=10.000000 LaserGradeEngraveFrequency=20000 LaserGradeEngraveSpeed=400.000000 LaserGradeEngraveBlowGasType=1 LaserGradeEngraveTwoDirector=1 LaserGradeEngraveScanStepLen=1.000000 LaserGradeEngraveGradeWidth=2.000000 LaserGradeEngraveGradeNumber=32 LaserGradeEngraveNeedRepairGrade=0 LaserGradeEngraveStartRepairGrade=0.200000 LaserGradeEngraveCfgNumber=5 LaserGradeEngraveMinSpeed_0=0.000000 LaserGradeEngraveMaxSpeed_0=150.000000 LaserGradeEngraveBufferLen_0=25.000000 LaserGradeEngraveChangeDirGap_0=0.000000 LaserGradeEngraveStartVel_0=45.000000 LaserGradeEngraveAcc_0=6000.000000 LaserGradeEngraveYSpeed_0=10.000000 LaserGradeEngraveYAcc_0=100.000000 LaserGradeEngraveSFOffsetX_0=0.000000 LaserGradeEngraveSFOffsetY_0=0.000000 LaserGradeEngraveMaxSpeed=1000.000000 LaserGradeEngraveScanDirector=0 LaserGradeEngraveMinSpeed_1=150.000000 LaserGradeEngraveMaxSpeed_1=250.000000 LaserGradeEngraveBufferLen_1=25.000000 LaserGradeEngraveChangeDirGap_1=0.000000 LaserGradeEngraveStartVel_1=45.000000 LaserGradeEngraveAcc_1=6000.000000 LaserGradeEngraveYSpeed_1=10.000000 LaserGradeEngraveYAcc_1=100.000000 LaserGradeEngraveSFOffsetX_1=0.000000 LaserGradeEngraveSFOffsetY_1=0.000000 LaserGradeEngraveMinSpeed_2=250.000000 LaserGradeEngraveMaxSpeed_2=350.000000 LaserGradeEngraveBufferLen_2=25.000000 LaserGradeEngraveChangeDirGap_2=0.000000 LaserGradeEngraveStartVel_2=45.000000 LaserGradeEngraveAcc_2=6000.000000 LaserGradeEngraveYSpeed_2=10.000000 LaserGradeEngraveYAcc_2=100.000000 LaserGradeEngraveSFOffsetX_2=0.000000 LaserGradeEngraveSFOffsetY_2=0.000000 LaserGradeEngraveMinSpeed_3=350.000000 LaserGradeEngraveMaxSpeed_3=450.000000 LaserGradeEngraveBufferLen_3=25.000000 LaserGradeEngraveChangeDirGap_3=0.000000 LaserGradeEngraveStartVel_3=45.000000 LaserGradeEngraveAcc_3=6000.000000 LaserGradeEngraveYSpeed_3=10.000000 LaserGradeEngraveYAcc_3=100.000000 LaserGradeEngraveSFOffsetX_3=0.000000 LaserGradeEngraveSFOffsetY_3=0.000000 LaserGradeEngraveMinSpeed_4=450.000000 LaserGradeEngraveMaxSpeed_4=550.000000 LaserGradeEngraveBufferLen_4=25.000000 LaserGradeEngraveChangeDirGap_4=0.000000 LaserGradeEngraveStartVel_4=45.000000 LaserGradeEngraveAcc_4=6000.000000 LaserGradeEngraveYSpeed_4=10.000000 LaserGradeEngraveYAcc_4=100.000000 LaserGradeEngraveSFOffsetX_4=0.000000 LaserGradeEngraveSFOffsetY_4=0.000000 [TechnicsOrign] StopPosition=7 ResponseEvent=1 [textdefault] FontHeight=16 FontSpace=.7 text=M.D. FontName=Georgia IsTrueType=1 mainShxName=txt subShxName=HZTXT [MainAxisSpeed] MainAxisDefaultIndex=0 [FileFormatCfg_ECP] MaxCurveNumber=1500 [LayerManager] HideNoOutputLayer=0 ApplyAllLayerAttrib=1 [FileFormatCfg_map] MaxCurveNumber=1500 [TECHNICS_PENCUT] CreateTechnicsCodeName=无名 TechnicsCfgType=0 PenCutCoordSysOID=0 PenCutOptimizePathType=1 PenCutInnerToOuter=1 PenCutDownToUpper=0 PenCutBlockHeight=150.000000 PenCutAutoSetPathDir=1 PenCutCicleMinSegNumber=36 PenCutDisperseLength=0.050000 PenCutCloseGapLength=0.000000 PenCutOverlapLength=0.000000 PenCutAdjustForClose=0 PenCutQXEnterLength=1.000000 PenCutDelayDownTime=0.000000 PenCutDelayUpTime=0.000000 PenCutOneAxisBackLashLength=0.000000 PenCutTwoAxisBackLashLength=0.000000 PenCutSpeed=75.000000 PenCutGWAcc=3000.000000 PenCutGWTime=0.010000 PenCutTrackSize=100 PenCutOffsetX=0.000000 PenCutOffsetY=0.000000 PenCutCtrolMode=0 PenCutCircleSpeedNum=0 [TECHNICS_KNIFECUT] KnifeCutDownSpeed=20 [TechcisMode] SupportMachineEngrave=0 [CreateTextCmd] SupportReverse=0 Convert2Curve=1 [FileFormatCfg_dxf] MaxCurveNumber=1500 [ArrayCopyCmd] SupportSPath=1 CenterAlign=0 [DaHen] NeedSetChangePower=0 StartPower=0 ChangePowerPoint=0 ChangeFrq=0 [AutoCalLeadInAndOutTrack] AdjustStartPointToConner=0 MinInflectionAngle=45.000000 MinInflectionLength=20.000000 OverLapLength=0.000000 ReserveBlockType=1 MinInterDistance=1.000000 InLeadLineType=0 InLeadLineLength=2.500000 InLeadLineAngle=45.000000 OutLeadLineType=0 OutLeadLineLength=2.500000 OutLeadLineAngle=45.000000 AutoAdjustStartPos=1 AutoAdjustStartPosToMidLine=1 KnifeGapOffset=0.000000 OffsetType=1 GetDataByLayer=0 AutoCheckDataRight=0 AutoCheckIntersect=0 AutoCheckTimes=2 MaxLeadLineLen=10.0 [CreateGroupCmd] ChangeToFirstLayer=1 [ImportFileAdjustData] AdjustCircleMode=0 CircleRadius=5.0000000000 [HALF_BMP] DotSize=1 ScanStep=0.01 [AddInOutLead] UseLineConnect=0 LineConnectLength=0.0 LineConnectAngle=0.0 InType=0 InArcRadius=2.0 InLineLength=.5 InAngle=0.00 OutType=0 OutArcRadius=2.0 OutLineLength=.5 OutAngle=0.00 StartDir=1 OverLapLength=0.00 StartDirType=0 CloseType=0 Valid=0 [CreateLineCmd] length=1 direct=0

syscfgRotary.ini

[Technics] CreateTechnicsCodeNumber=6 CreateTechnicsCodeDefaultMode=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_LINE=TECHNICS_UNKOWN CreateTechnicsCodeDefaultMode_IMAGE=TECHNICS_UNKOWN TechnicsDefaultType=0 CreateTechnicsCodeDefaultMode_16711680=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_0=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_255=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_33023=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_65280=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_32768=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_16776960=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_12615935=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_5987163=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_3421236=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_65535=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_16636309=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_7697781=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_12615680=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_1048455=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_3499673=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_8421376=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_10263708=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_4194368=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_8388736=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_8388863=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_5131854=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_8323072=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_12615808=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_8421440=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_8388672=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_10027161=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_32639=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_11974326=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_6842472=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_8553090=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_16751001=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_16751052=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_3394764=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_8421504=TECHNICS_LASERENGRAVE CreateTechnicsCodeDefaultMode_11119017=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_2565927=TECHNICS_LASERCUT CreateTechnicsCodeDefaultMode_9408399=TECHNICS_LASERCUT [CreateTechnicsCode_0] CreateTechnicsCodeName=TECHNICS_LASERCUT [CreateTechnicsCode_1] CreateTechnicsCodeName=TECHNICS_LASERENGRAVE [CreateTechnicsCode_2] CreateTechnicsCodeName=TECHNICS_LASERGRADEENGRAVE [CreateTechnicsCode_3] CreateTechnicsCodeName=TECHNICS_LASERHITPOINT [CreateTechnicsCode_4] CreateTechnicsCodeName=TECHNICS_PENCUT [CreateTechnicsCode_5] CreateTechnicsCodeName=TECHNICS_KNIFECUT [CompanyInfo] TelPhone=Telepnone: SoftName=Lasercut5.3 CompanyName=G Http=www...com PrinterName=Lasercut(Leetro) [ApplicationSetting] OutPutWorkFile=1 FlashDelayTime=10 UserHighConfige=1 ShowDebugWndMsg=0 MainFaceType=0 Mpc05PortNumber=1 SelectOut=0 ShowHandle=1 BackColorRed=210 BackColorGreen=255 BackColorBlue=255 PromptRevise=0 OutputPLTPath=c:\Data.PLT LaserCutForSteel=0 LimitWorkTimes=-1 HideChineseButton=0 TipPreWorkTime=0 EcYXAxisType=0 PrintMode=1 [IMPORTFILE] PREFILEMODE=0 NeedSuckPoint=0 SuckPointTol=0.0 ShowMinPointSize=0.0 ShowMaxPointSize=100.0 CENTERDATA=1 UnitType=0 SysPointDefaultSize=1.0 SysDXFReadPointType=0 SysDXFMaxLength=2000 SysDXFMaxWidth=2000 SysDXFMaxHeight=100 DXFCalBasicPrecision=0.5 DXFNeedCalDataBound=0 MTextTrueTypeSpaceScale=0.25 MTextShxSpaceScale=0.35 AdjustDirect=0 clockwise=1 UseDifferentColor=1 InnerColor=8388863 OutColor=4227072 [MAPARRAY] MoveData=1 [TableSetting] TableGridWidth=50 TableGridHeight=50 [MotionCard_0] MotionCard_Name=Step03Card [Step03Card_0] MotionCardName=Step-servo Co.,Ltd ValidIOLevel=0 ValidLimitLevel=0 LaserPowerMode=0 LaserDefaultPulse=25000 AxisPulseOutputMode=0 AxisPulseOutputLogic=0 ChecHomeIOType=0 CardVer=LH OpenCardTipMsg=0 GradeEngraveType=3 LaserMaxPower=100 CardMinVer=1 LaserPowerTableNumber=20 LaserPowerTable_0=0 LaserPowerTable_5=5 LaserPowerTable_10=10 LaserPowerTable_15=15 LaserPowerTable_20=20 LaserPowerTable_25=25 LaserPowerTable_30=30 LaserPowerTable_35=35 LaserPowerTable_40=40 LaserPowerTable_45=45 LaserPowerTable_50=50 LaserPowerTable_55=55 LaserPowerTable_60=60 LaserPowerTable_65=65 LaserPowerTable_70=70 LaserPowerTable_75=75 LaserPowerTable_80=80 LaserPowerTable_85=85 LaserPowerTable_90=90 LaserPowerTable_95=95 LaserPowerTable_100=100 LaserLowerPulse=1000 LaserLowerPower=0.1 LaserPowerRepairPower=0 TJCardNumber=1 TJCARD_NUMBER_0=41534552 YEncodeRate=10000.000000 YSpdIncrease=300.000000 XEncodeRate=10000.000000 XSpdIncrease=300.000000 YScaleCtrl=5.000000 YIntegralCtrl=0.011500 YDiffCtrl=0.002875 XScaleCtrl=5.000000 XIntegralCtrl=0.011500 XDiffCtrl=0.002875 YScaleCtrlii=5.000000 XScaleCtrlii=5.000000 YZero=0.000000 XZero=0.000000 YIntegralUpLev=100.000000 XIntegralUpLev=100.000000 DaLimY=0.500000 DaLimX=0.500000 WaterProtected=0 ZMoveType=0 CanContinueForEngrave=0 SaveBreakTime=0.1 [Step03LXCard_0] MotionCardName=Step-servo Co.,Ltd ValidIOLevel=0 ValidLimitLevel=0 LaserPowerMode=0 LaserDefaultPulse=25000 AxisPulseOutputMode=1 AxisPulseOutputLogic=0 ChecHomeIOType=0 CardVer=LX OpenCardTipMsg=0 GradeEngraveType=3 CardMinVer=1 LaserMaxPower=100 LaserPowerTableNumber=20 LaserPowerTable_0=0 LaserPowerTable_5=5 LaserPowerTable_10=10 LaserPowerTable_15=15 LaserPowerTable_20=20 LaserPowerTable_25=25 LaserPowerTable_30=30 LaserPowerTable_35=35 LaserPowerTable_40=40 LaserPowerTable_45=45 LaserPowerTable_50=50 LaserPowerTable_55=55 LaserPowerTable_60=60 LaserPowerTable_65=65 LaserPowerTable_70=70 LaserPowerTable_75=75 LaserPowerTable_80=80 LaserPowerTable_85=85 LaserPowerTable_90=90 LaserPowerTable_95=95 LaserPowerTable_100=100 LaserLowerPulse=0 LaserLowerPower=0 TestCardNumber=1 SupportArcMove=0 SupportBezierMove=0 ConAccStartSpeed=200.0 MaxTrackNumInBuffer=500 ChangLaserIONumber=0 [Setup] ShortCutTip=LaserCut 5.3 ExecuteFileName = LaserCut53.exe TipSetupChineseLanguage=1 SetUpType=0 AutoCADTip=AutoCAD CoreDrawTip=CorelDraw LaserCutTip=LaserCut53 InstallPath=C:\LaserCut53 [ONEAXIS_DEFAULT] CoordSystem_Name=单轴 SysOutputIOOID_1=-1 SysOutputIOOID_2=-1 OutputIOValue_1=-1 OutputIOValue_2=-1 SysAxisOID=1 OnePulseMoveLength=0.00078125 TableLength=150 TableMinPosition=0 TableMaxPosition=150 OriginDirector=-1 OriginPosition=0 GoOriginSpeed=2 OriginOffsetLen=1.5 NeedRevise=0 StartSpeed=0.5 WorkAcc=100 HandFastMoveSpeed = 15 HandSlowMoveSpeed = 1 [TWOAXIS_DEFAULT] CoordSystem_Name=两轴 SysOutputIOOID_1=-1 SysOutputIOOID_2=-1 OneAxisSysOID=0 TwoAxisSysOID=1 OneAxisOnePulseMoveLength=0.0072 TwoAxisOnePulseMoveLength=0.004843750000000 OneAxisTableLength=1000.000000 TwoAxisTableLength=600.000000 OneAxisTableMinPosition=0.000000 OneAxisTableMaxPosition=1000.000000 TwoAxisTableMinPosition=0.000000 TwoAxisTableMaxPosition=600.000000 OneAxisOriginDirector=-1 TwoAxisOriginDirector=1 OneAxisOriginPosition=0.000000 TwoAxisOriginPosition=600.000000 OneAxisGoOriginSpeed=15.000000 TwoAxisGoOriginSpeed=15.000000 NeedRevise=0 StartSpeed=10.000000 WorkAcc=1200.000000 SpaceSpeed=300.000000 ConstantSpeed=10.000000 HandFastMoveSpeed=200.000000 HandSlowMoveSpeed=50.000000 OneAxisBackLashLength=0.0 TwoAxisBackLashLength=0.0 [CoordSystem_0] CoordSystem_Type=TWOAXIS [CoordSystem_1] CoordSystem_Type=ONEAXIS [CoordSystem_2] CoordSystem_Type=THREEAXIS [TWOAXIS_0] CoordSystem_Name=工作台 SysOutputIOOID_1=-1 SysOutputIOOID_2=-1 OneAxisSysOID=0 TwoAxisSysOID=1 OneAxisOnePulseMoveLength=0.007200000000000 TwoAxisOnePulseMoveLength=0.016200000000000 OneAxisTableLength=1200.000000 TwoAxisTableLength=2000.000000 OneAxisTableMinPosition=0.000000 OneAxisTableMaxPosition=1200.000000 TwoAxisTableMinPosition=0.000000 TwoAxisTableMaxPosition=2000.000000 OneAxisOriginDirector=1 TwoAxisOriginDirector=1 OneAxisOriginPosition=1200.000000 TwoAxisOriginPosition=1000.000000 OneAxisGoOriginSpeed=150.000000 TwoAxisGoOriginSpeed=150.000000 OneAxisOriginOffsetLen=5 TwoAxisOriginOffsetLen=5 NeedRevise=1 StartSpeed=5.000000 WorkAcc=500.000000 SpaceSpeed=150.000000 ConstantSpeed=8.000000 HandFastMoveSpeed=200.000000 HandSlowMoveSpeed=160.000000 OneAxisOverLapLength=0.000000 WorkAcc2=700.000000 SupportTwoXAxis=0 TwoXAxisOffsetY2=0 OneAxisOnePulseMoveLength2=0.00484375 TwoXAxisPulseMoveLen=0.0062320000 TwoXAxisReduceLen=70 ParkStartSpeedScale=1.0 ParkAccScale=1.0 ParkSpeedScale=1.0 WorkAccAcc=15000.000000 SpaceAccAcc=15000.000000 XAxisMaxChangeSpeed=10.000000 YAxisMaxChangeSpeed=10.000000 SupportTwoLaser=0 TwoLaserSpaceLength=0.000000 [ONEAXIS_1] CoordSystem_Name=转料 SysOutputIOOID_1=-1 SysOutputIOOID_2=-1 SysAxisOID=2 OnePulseMoveLength=0.001250000000000 TableLength=380.000000 TableMinPosition=0.000000 TableMaxPosition=380.000000 OriginDirector=1 OriginPosition=380.000000 GoOriginSpeed=0.000000 OriginOffsetLen=7.500000 NeedRevise=0 WorkAcc=15.000000 HandFastMoveSpeed =15.000000 HandSlowMoveSpeed =10.000000 StartSpeed=5.000000 SpaceSpeed=10.000000 WorkAccAcc=20000.000000 SpaceAccAcc=80000.000000 AxisMaxChangeSpeed=30.000000 [HandMoveCoordSystem_DEFAULT] HandMoveAxis1Increase=-1 HandMoveAxis1Reduce=-1 HandMoveAxis2Increase=-1 HandMoveAxis2Reduce=-1 HandMoveAxis3Increase=-1 HandMoveAxis3Reduce=-1 HandMoveSpeed=-1 HandMoveStepOrContinue=-1 [Technics_Laser_Data] ExportRows=1 ExportColumns=1 ExportRowSpace=0.00000 ExportColumnSpace=0.00000 ExportRowCW=0.00000 ExportColumnCW=0.00000 DrawArrayDataType=1 LogicOrgPostionType=1 ArrayExportOrder=1 ArrayExportXOrder=1 ArrayExportYOrder=1 AtOnceExport=1 OutputTimes=1 DelayTime=0 FeedLength=0.000000 FeedSpeed=5.000000 MachineHasWorkMinute=9561 FeedDelayTime=0 ChangeSerialNo=0 OuputLayerOrderType=1 IsTwoLaserWorking=1 [LaserSimulateSpeedScale] SimulateSpeedScaleNumber = 3 SimulateSpeed0_Min=0 SimulateSpeed0_Max=100 SimulateSpeed0_Scale=1 SimulateSpeed1_Min=100 SimulateSpeed1_Max=500 SimulateSpeed1_Scale=1 SimulateSpeed2_Min=500 SimulateSpeed2_Max=5000 SimulateSpeed2_Scale=1 [MACHINE_MODIFYCFG] LASER_MODIFYCFG_SAVEPASSWORD=1 LASER_MODIFYCFG_PASSWORD=0 [RUNTIMECFG] OneCoordSys_ONEAXIS_PULSE=1600 OneCoordSys_ONEAXIS_LENGTH=0.000000 TwoCoordSys_ONEAXIS_PULSE=5000 TwoCoordSys_ONEAXIS_LENGTH=36.000000 TwoCoordSys_TWOAXIS_PULSE=5000 TwoCoordSys_TWOAXIS_LENGTH=81.000000 IMPORTFILE_CENTERDATA=1 CombineLine_TOL=0.010000 SmoothLine_JB=0 AdjustStartPt=0 NeedPartWorkCtrol=0 StartWorkDelayTime=0 NeedControlMainAxis=0 OverWorkDelayTime=0 TwoCoordSys_TWOAXIS_PULSE2=6400 TwoCoordSys_TWOAXIS_LENGTH2=50 [ResourceManager] CreateDefaultLanguageFile=0 [GEOMETRY] SupportARC=0 [FileFormatCfg_dst] MaxCurveNumber=1500 MustCloseBlock=1 SmoothTol=0.500000 [FileFormatCfg_plt] MaxCurveNumber=1500 DrawPLTUnit=1016.000000 [FileFormatCfg_ai] MaxCurveNumber=1400 [FileFormatCfg_eps] MaxCurveNumber=1400 [FileFormatCfg_bmp] MaxCurveNumber=1400 [Laser] AutoSimulateSpeed=0 [DataCheck] overlap=0 selfinter=1 close=1 intersection=0 overlaptol=0.01 lineinterTol=0 interwithleadline=1 CheckLayerCode=-1 [COREDRAW_CAD] MustCalSecondFile=1 [OFFSETCFG] OffsetDist=0.100000 OffsetType=0 OffsetTolerance=0.200000 MinPointNum=6 Offset=0 connect=1 [LASERCAD] GetEntitiesType=0 [MachineControl] MachineMotionCardNumber = 1 MachineAXISNumber = 3 MachineInputIONumber=17 MachineOutputIONumber=10 CoordSystemNumber =2 MainCoordSystemID = 0 FeedCoordSystemOID=1 TestMoveLength=50.000000 TestLaserPower=10.000000 StartCmdDoPause=0 MachineInputIODelay=3 ClickLaserTime=0.1 ApplicationLimitType=10 TestOpenLaserType=0 ThreadWorkMode=1 PerWorkTimesApplyHardHome=0 LoopAppylHomeType=1 AtOnceExport=0 ClipBoxPower=25.000000 ClipBoxOffsetLen=2.000000 ClipBoxSpeed=50.000000 RunBoxConnerAcc=100 NeedAlign=0 PerWorkMustGoLogicHome=1 AfterGoHomeToLogicHome=0 TestIsSlowSpeed=0 ClipBoxPower2=40.000000 RunMustDatum=0 AlignMachineZPos=0.000000 LogicOrgPositionX=663.322933 LogicOrgPositionY=435.327613 NeedOutput530=0 SupportSplitBlockOutPut=0 ZAxisForLaserFocus=0 FeedAxisGoHome=0 NeedContinueTipForBlock=0 [MotionAxis_0] MotionCard_Index=0 MotionCard_axisOID=4 [MotionAxis_1] MotionCard_Index=0 MotionCard_axisOID=3 [MotionAxis_2] MotionCard_Index=0 MotionCard_axisOID=2 [MotionInputIO_0];X加 MotionCard_Index=0 MotionCard_InputIOOID=38 [MotionInputIO_1];X减 MotionCard_Index=0 MotionCard_InputIOOID=46 [MotionInputIO_2];Y加 MotionCard_Index=0 MotionCard_InputIOOID=40 [MotionInputIO_3];Y减 MotionCard_Index=0 MotionCard_InputIOOID=36 [MotionInputIO_4];开始 MotionCard_Index=0 MotionCard_InputIOOID=44 [MotionInputIO_5];暂停 MotionCard_Index=0 MotionCard_InputIOOID=8 [MotionInputIO_6];停止 MotionCard_Index=0 MotionCard_InputIOOID=12 [MotionInputIO_7];按键快慢 MotionCard_Index=0 MotionCard_InputIOOID=1 [MotionInputIO_8];步进/连续 MotionCard_Index=0 MotionCard_InputIOOID=1 [MotionInputIO_9];Z加 MotionCard_Index=0 MotionCard_InputIOOID=29 [MotionInputIO_10];Z减 MotionCard_Index=0 MotionCard_InputIOOID=31 [MotionInputIO_11];回原点 MotionCard_Index=0 MotionCard_InputIOOID=10 [MotionInputIO_12];走边框 MotionCard_Index=0 MotionCard_InputIOOID=42 [MotionInputIO_13];激光点射 MotionCard_Index=0 MotionCard_InputIOOID=27 [MotionInputIO_14];XYZ对刀 MotionCard_Index=0 MotionCard_InputIOOID=-1 [MotionInputIO_15];Z轴对刀 MotionCard_Index=0 MotionCard_InputIOOID=-1 [MotionInputIO_16];盖盖保护 MotionCard_Index=0 MotionCard_InputIOOID=-1 [HandMoveCoordSystem_0] HandMoveAxis1Increase=0 HandMoveAxis1Reduce=1 HandMoveAxis2Increase=2 HandMoveAxis2Reduce=3 HandMoveSpeed=7 HandMoveStepOrContinue=8 HandMoveAxis3Increase=-1 HandMoveAxis3Reduce=-1 [HandMoveCoordSystem_1] HandMoveAxis1Increase=9 HandMoveAxis1Reduce=10 HandMoveSpeed=7 HandMoveStepOrContinue=8 HandMoveAxis2Increase=-1 HandMoveAxis2Reduce=-1 HandMoveAxis3Increase=-1 HandMoveAxis3Reduce=-1 [MotionOutputIO_0];激光开关 MotionCard_Index=0 MotionCard_OutputIOOID=15 [MotionOutputIO_1];功率调整 MotionCard_Index=0 MotionCard_OutputIOOID=18 [MotionOutputIO_2];吹气信号 MotionCard_Index=0 MotionCard_OutputIOOID=150 [MotionOutputIO_3];正在加工，输出的信号 MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_4];随动 MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_5];工作台切换 MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_6]; MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_7];光闸 MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_8];激光 MotionCard_Index=0 MotionCard_OutputIOOID=-1 [MotionOutputIO_9] MotionCard_Index=0 MotionCard_OutputIOOID=-1 [TECHNICS_LASERCUT] CreateTechnicsCodeName=激光切割 TechnicsCfgType=0 LaserCutCoordSysOID=0 LaserCutConnerPower=60.000000 LaserCutWorkPower=100.000000 LaserCutFrequency=500 LaserCutOptimizePathType=1 LaserCutInnerToOuter=1 LaserCutDownToUpper=0 LaserCutBlockHeight=150.000000 LaserCutAutoSetPathDir=1 LaserCutCicleMinSegNumber=36 LaserCutDisperseLength=0.020000 LaserCutCloseGapLength=0.000000 LaserCutOverlapLength=0.000000 LaserCutAdjustForClose=1 LaserCutQXEnterLength=0.000000 LaserCutDelayMoveTime=0.000000 LaserCutOpenLaserDelayTime=0.000000 LaserCutCloseLaserDelayTime=0.000000 LaserCutOneAxisBackLashLength=0.000000 LaserCutTwoAxisBackLashLength=0.010000 LaserCutBlowGasType=2 LaserCutAheadBlowGasTimes=0.000000 LaserCutNoCloseGasTimes=0.000000 LaserCutSpeed=3.000000 LaserCutGWAcc=60.000000 LaserCutCircleSpeedNum=0 LaserCutCircleSpeed0_MinR=0.000000 LaserCutCircleSpeed0_MaxR=0.550000 LaserCutCircleSpeed0_Speed=10.000000 LaserCutCircleSpeed1_MinR=0.550000 LaserCutCircleSpeed1_MaxR=1.050000 LaserCutCircleSpeed1_Speed=15.000000 LaserCutCircleSpeed2_MinR=1.050000 LaserCutCircleSpeed2_MaxR=1.550000 LaserCutCircleSpeed2_Speed=25.000000 LaserCutCircleSpeed3_MinR=1.550000 LaserCutCircleSpeed3_MaxR=2.050000 LaserCutCircleSpeed3_Speed=30.000000 LaserCutCircleSpeed4_MinR=2.050000 LaserCutCircleSpeed4_MaxR=3.050000 LaserCutCircleSpeed4_Speed=35.000000 LaserCutCircleSpeed5_MinR=3.050000 LaserCutCircleSpeed5_MaxR=4.050000 LaserCutCircleSpeed5_Speed=40.000000 LaserCutGWTime=0.010000 LaserCutTrackSize=100 LaserCutMaxSpeed=400.000000 LaserCutConnerPower2=30.000000 LaserCutWorkPower2=50.000000 LaserCutInnerToOuter2=0 LaserCutStartPosType=0 LaserCutDelayTimeAfterCloseLaser=0.000000 LaserCutBackLashAddSpaceLength=8.000000 LaserCutLineLength=0.000000 SpaceCutLineLength=0.000000 bSpaceLineFirst=0 LaserCutAdjustMove=0 LaserCutAdjustMoveDelay=0.000000 LaserCutUpLen=0.000000 LaserCutDisperseMinLength=0.02 LaserCutOpenGZDelayTime=0.000000 LaserCutSpeedScale1=1.0 LaserCutSpeedScale2=1.0 LaserCutSpeedScale3=1.0 LaserCutSpeedScale4=1.0 LaserCutSpeedScale5=1.0 LaserCutSpeedScale6=1.0 LaserCutSpeedScale7=1.0 LaserCutSpeedScale8=1.0 AdjustStartPointToConner=0 SplitCircleForBY=0 AdjustMoveType=0 WaitInputIODelayTime=5 RepeatOpenLaserTimes=0 SupportAIOutput=0 [TECHNICS_LASERENGRAVE] CreateTechnicsCodeName=激光雕刻 TechnicsCfgType=0 LaserEngraveCoordSysOID=0 LaserEngravePower=100.000000 LaserEngraveFrequency=550 LaserEngraveSpeed=40.000000 LaserEngraveBlowGasType=1 LaserEngraveFillCircleR=2.500000 LaserEngraveFillCircleSpace=2.500000 LaserEngraveFillCircle=0 LaserEngraveTwoDirector=1 LaserEngraveScanStepLen=0.150000 LaserEngraveCfgNumber=5 LaserEngraveMinSpeed_0=0.000000 LaserEngraveMaxSpeed_0=250.000000 LaserEngraveBufferLen_0=25.000000 LaserEngraveChangeDirGap_0=-0.170000 LaserEngraveStartVel_0=45.000000 LaserEngraveAcc_0=6000.000000 LaserEngraveYSpeed_0=10.000000 LaserEngraveYAcc_0=100.000000 LaserEngraveSFOffsetX_0=0.085000 LaserEngraveSFOffsetY_0=0.000000 LaserEngraveExpandPenWidth=0 LaserEngraveExpandPenWidthScale=15.000000 LaserEngraveFillCircleType=0 LaserEngraveMaxSpeed=1000.000000 LaserEngravePower2=60.000000 LaserEngraveScanDirector=0 LaserEngraveMinSpeed_1=250.000000 LaserEngraveMaxSpeed_1=350.000000 LaserEngraveBufferLen_1=25.000000 LaserEngraveChangeDirGap_1=-0.200000 LaserEngraveStartVel_1=45.000000 LaserEngraveAcc_1=6000.000000 LaserEngraveYSpeed_1=10.000000 LaserEngraveYAcc_1=100.000000 LaserEngraveSFOffsetX_1=0.100000 LaserEngraveSFOffsetY_1=0.000000 LaserEngraveMinSpeed_2=350.000000 LaserEngraveMaxSpeed_2=450.000000 LaserEngraveBufferLen_2=25.000000 LaserEngraveChangeDirGap_2=-0.240000 LaserEngraveStartVel_2=45.000000 LaserEngraveAcc_2=6000.000000 LaserEngraveYSpeed_2=10.000000 LaserEngraveYAcc_2=100.000000 LaserEngraveSFOffsetX_2=0.120000 LaserEngraveSFOffsetY_2=0.000000 LaserEngraveMinSpeed_3=450.000000 LaserEngraveMaxSpeed_3=550.000000 LaserEngraveBufferLen_3=25.000000 LaserEngraveChangeDirGap_3=-0.270000 LaserEngraveStartVel_3=45.000000 LaserEngraveAcc_3=6000.000000 LaserEngraveYSpeed_3=10.000000 LaserEngraveYAcc_3=100.000000 LaserEngraveSFOffsetX_3=0.135000 LaserEngraveSFOffsetY_3=0.000000 LaserEngraveMinSpeed_4=550.000000 LaserEngraveMaxSpeed_4=1000.000000 LaserEngraveBufferLen_4=25.000000 LaserEngraveChangeDirGap_4=-0.300000 LaserEngraveStartVel_4=45.000000 LaserEngraveAcc_4=6000.000000 LaserEngraveYSpeed_4=10.000000 LaserEngraveYAcc_4=100.000000 LaserEngraveSFOffsetX_4=0.150000 LaserEngraveSFOffsetY_4=0.000000 LaserEngraveMinSpeed_5=550.000000 LaserEngraveMaxSpeed_5=650.000000 LaserEngraveBufferLen_5=25.000000 LaserEngraveChangeDirGap_5=0.000000 LaserEngraveStartVel_5=45.000000 LaserEngraveAcc_5=6000.000000 LaserEngraveYSpeed_5=10.000000 LaserEngraveYAcc_5=100.000000 LaserEngraveSFOffsetX_5=0.000000 LaserEngraveSFOffsetY_5=0.000000 LaserEngraveMinSpeed_6=650.000000 LaserEngraveMaxSpeed_6=750.000000 LaserEngraveBufferLen_6=25.000000 LaserEngraveChangeDirGap_6=0.000000 LaserEngraveStartVel_6=45.000000 LaserEngraveAcc_6=6000.000000 LaserEngraveYSpeed_6=10.000000 LaserEngraveYAcc_6=100.000000 LaserEngraveSFOffsetX_6=0.000000 LaserEngraveSFOffsetY_6=0.000000 LaserEngraveMinSpeed_7=750.000000 LaserEngraveMaxSpeed_7=850.000000 LaserEngraveBufferLen_7=25.000000 LaserEngraveChangeDirGap_7=0.000000 LaserEngraveStartVel_7=45.000000 LaserEngraveAcc_7=6000.000000 LaserEngraveYSpeed_7=10.000000 LaserEngraveYAcc_7=100.000000 LaserEngraveSFOffsetX_7=0.000000 LaserEngraveSFOffsetY_7=0.000000 LaserEngraveMinSpeed_8=850.000000 LaserEngraveMaxSpeed_8=1000.000000 LaserEngraveBufferLen_8=25.000000 LaserEngraveChangeDirGap_8=0.000000 LaserEngraveStartVel_8=45.000000 LaserEngraveAcc_8=6000.000000 LaserEngraveYSpeed_8=10.000000 LaserEngraveYAcc_8=100.000000 LaserEngraveSFOffsetX_8=0.000000 LaserEngraveSFOffsetY_8=0.000000 [TECHNICS_LASERHITPOINT] CreateTechnicsCodeName=激光打孔 TechnicsCfgType=0 LaserHitPointCoordSysOID=0 LaserHitPointWorkPower=60.000000 LaserHitPointFrequency=20000 LaserHitPointOptimizePathType=1 LaserHitPointDownToUpper=0 LaserHitPointInnerToOuter=1 LaserHitPointBlockHeight=150.000000 LaserHitPointAutoSetPathDir=1 LaserHitPointDisperseLength=0.050000 LaserHitPointType=1 LaserHitPointGapLength=2.000000 LaserHitPointDelayTime=0.100000 LaserHitPointBlowGasType=1 LaserHitPointWorkPower2=50.000000 LaserHitPointStartPosType=0 LaserHitPointOpenLaserDelayTime=0.000000 [TECHNICS_LASERGRADEENGRAVE] CreateTechnicsCodeName=激光坡度雕刻 TechnicsCfgType=0 LaserGradeEngraveCoordSysOID=0 LaserGradeEngravePower=100.000000 LaserGradeEngraveStartPower=10.000000 LaserGradeEngraveFrequency=20000 LaserGradeEngraveSpeed=50.000000 LaserGradeEngraveBlowGasType=1 LaserGradeEngraveTwoDirector=1 LaserGradeEngraveScanStepLen=1.000000 LaserGradeEngraveGradeWidth=2.000000 LaserGradeEngraveGradeNumber=32 LaserGradeEngraveNeedRepairGrade=0 LaserGradeEngraveStartRepairGrade=0.200000 LaserGradeEngraveCfgNumber=5 LaserGradeEngraveMinSpeed_0=0.000000 LaserGradeEngraveMaxSpeed_0=150.000000 LaserGradeEngraveBufferLen_0=25.000000 LaserGradeEngraveChangeDirGap_0=0.000000 LaserGradeEngraveStartVel_0=45.000000 LaserGradeEngraveAcc_0=6000.000000 LaserGradeEngraveYSpeed_0=10.000000 LaserGradeEngraveYAcc_0=100.000000 LaserGradeEngraveSFOffsetX_0=0.000000 LaserGradeEngraveSFOffsetY_0=0.000000 LaserGradeEngraveMaxSpeed=1000.000000 LaserGradeEngraveScanDirector=0 LaserGradeEngraveMinSpeed_1=150.000000 LaserGradeEngraveMaxSpeed_1=250.000000 LaserGradeEngraveBufferLen_1=25.000000 LaserGradeEngraveChangeDirGap_1=0.000000 LaserGradeEngraveStartVel_1=45.000000 LaserGradeEngraveAcc_1=6000.000000 LaserGradeEngraveYSpeed_1=10.000000 LaserGradeEngraveYAcc_1=100.000000 LaserGradeEngraveSFOffsetX_1=0.000000 LaserGradeEngraveSFOffsetY_1=0.000000 LaserGradeEngraveMinSpeed_2=250.000000 LaserGradeEngraveMaxSpeed_2=350.000000 LaserGradeEngraveBufferLen_2=25.000000 LaserGradeEngraveChangeDirGap_2=0.000000 LaserGradeEngraveStartVel_2=45.000000 LaserGradeEngraveAcc_2=6000.000000 LaserGradeEngraveYSpeed_2=10.000000 LaserGradeEngraveYAcc_2=100.000000 LaserGradeEngraveSFOffsetX_2=0.000000 LaserGradeEngraveSFOffsetY_2=0.000000 LaserGradeEngraveMinSpeed_3=350.000000 LaserGradeEngraveMaxSpeed_3=450.000000 LaserGradeEngraveBufferLen_3=25.000000 LaserGradeEngraveChangeDirGap_3=0.000000 LaserGradeEngraveStartVel_3=45.000000 LaserGradeEngraveAcc_3=6000.000000 LaserGradeEngraveYSpeed_3=10.000000 LaserGradeEngraveYAcc_3=100.000000 LaserGradeEngraveSFOffsetX_3=0.000000 LaserGradeEngraveSFOffsetY_3=0.000000 LaserGradeEngraveMinSpeed_4=450.000000 LaserGradeEngraveMaxSpeed_4=550.000000 LaserGradeEngraveBufferLen_4=25.000000 LaserGradeEngraveChangeDirGap_4=0.000000 LaserGradeEngraveStartVel_4=45.000000 LaserGradeEngraveAcc_4=6000.000000 LaserGradeEngraveYSpeed_4=10.000000 LaserGradeEngraveYAcc_4=100.000000 LaserGradeEngraveSFOffsetX_4=0.000000 LaserGradeEngraveSFOffsetY_4=0.000000 [TechnicsOrign] StopPosition=9 ResponseEvent=1 [textdefault] FontHeight=10 FontSpace=.8 text=Out FontName=Georgia IsTrueType=1 mainShxName=txt subShxName=NULL [MainAxisSpeed] MainAxisDefaultIndex=0 [FileFormatCfg_ECP] MaxCurveNumber=1500 [LayerManager] HideNoOutputLayer=0 ApplyAllLayerAttrib=1 [FileFormatCfg_map] MaxCurveNumber=1500 [TECHNICS_PENCUT] CreateTechnicsCodeName=无名 TechnicsCfgType=0 PenCutCoordSysOID=0 PenCutOptimizePathType=1 PenCutInnerToOuter=1 PenCutDownToUpper=0 PenCutBlockHeight=150.000000 PenCutAutoSetPathDir=1 PenCutCicleMinSegNumber=36 PenCutDisperseLength=0.050000 PenCutCloseGapLength=0.000000 PenCutOverlapLength=0.000000 PenCutAdjustForClose=0 PenCutQXEnterLength=1.000000 PenCutDelayDownTime=0.000000 PenCutDelayUpTime=0.000000 PenCutOneAxisBackLashLength=0.000000 PenCutTwoAxisBackLashLength=0.000000 PenCutSpeed=75.000000 PenCutGWAcc=3000.000000 PenCutGWTime=0.010000 PenCutTrackSize=100 PenCutOffsetX=0.000000 PenCutOffsetY=0.000000 PenCutCtrolMode=0 PenCutCircleSpeedNum=0 [TECHNICS_KNIFECUT] KnifeCutDownSpeed=20 [TechcisMode] SupportMachineEngrave=0 [CreateTextCmd] SupportReverse=0 Convert2Curve=1 [FileFormatCfg_dxf] MaxCurveNumber=1500 [ArrayCopyCmd] SupportSPath=1 CenterAlign=0 [DaHen] NeedSetChangePower=0 StartPower=0 ChangePowerPoint=0 ChangeFrq=0 [AutoCalLeadInAndOutTrack] AdjustStartPointToConner=0 MinInflectionAngle=45.000000 MinInflectionLength=20.000000 OverLapLength=0.000000 ReserveBlockType=1 MinInterDistance=1.000000 InLeadLineType=0 InLeadLineLength=2.500000 InLeadLineAngle=45.000000 OutLeadLineType=0 OutLeadLineLength=2.500000 OutLeadLineAngle=45.000000 AutoAdjustStartPos=1 AutoAdjustStartPosToMidLine=1 KnifeGapOffset=0.000000 OffsetType=1 GetDataByLayer=0 AutoCheckDataRight=0 AutoCheckIntersect=0 AutoCheckTimes=2 MaxLeadLineLen=10.0 [CreateGroupCmd] ChangeToFirstLayer=1 [ImportFileAdjustData] AdjustCircleMode=0 CircleRadius=5.0000000000 [HALF_BMP] DotSize=1 ScanStep=0.01 [AddInOutLead] UseLineConnect=0 LineConnectLength=0.0 LineConnectAngle=0.0 InType=0 InArcRadius=2.0 InLineLength=.5 InAngle=0.00 OutType=0 OutArcRadius=2.0 OutLineLength=.5 OutAngle=0.00 StartDir=1 OverLapLength=0.00 StartDirType=0 CloseType=0 Valid=0 [CreateLineCmd] length=1 direct=0