PotLock 2020-01-18: The Calm Before the Storm Edition Tasklist
Contents
PotLock: The Calm Before Amidst the Storm Edition (January 18, 2020) Tasklists
Tasklists
Spacewide Stuff
- Take new pictures for
- Equipment pages
- https://wiki.hackerspaces.org/I3Detroit
- Please remember that if you're taking pictures that include people you need their consent
- Try to inventory mezzanines and update https://www.i3detroit.org/wiki/Long_Term_Storage
- Print out Equipment Labels List and apply to equipment
pages.
- Genie
- Check battery fluid level. If the battery water is low, top off with distilled only, preferably from a freshly opened jug.
- If you’re really bored, lube the column and/or change the hydraulic fluid.
- Stuff Stuff
- Insure parking permits and tickets are stocked up.
- Apply as needed to stuff left out in the space.
- Clean up lost and found
- E-Waste from Graveyard to Silicon Alley
B-Side (Commons)
Tasks
- Add foam to the wall air conditioner so it leaks less heat
- Painting!
- Cut foam for ceiling vent(s)
Supplies Needed
Classroom/Friendly Bathroom
Tasks
- Finish painting crown molding
- Touch up walls (patch holes/paint over)
- Improve ceiling
- Fix collapsing panels
- Weatherstrip door
- Move caddy from bunk couch to south-east wall (ask Jan)
- Turn zone signage into vinyl (T. Drury?)
- Finish painting hallway
- Scrub floor/base molding
- Add catch tray under soap dispenser in bathroom
Supplies Needed
Laser Zone
- Vacuum out the bottoms of the laser cabinets
- Clean air filters on chillers
- Check water levels in chillers
- Re-hang examples on the wall
Machine Shop
Tasks
- install new surface grinder
- sort out drill bits and taps
- sort out contents under the work benches
- foam the hole in the center back wall (used to be a fan)
- investigate blown capacitor(?) in vent motor
Supplies Needed
- foam sheet for wall, not terribly thick, about 18" square (or tufts of fiberglass or cotton insulation)
Tool Crib
- Paint Powertools
- If anyone wants to sort existing fasteners that would be cool but I'm not going to do it. Mtfurlan (talk)
Welding Zone
Tasks
- Clean
- Move stuff and sweep. Be careful not to kick up dust, just gather it up gently.
- Use floor compound if you want.
- Organize
- The shelves - Take stuff off, wipe off the dust, put back with some semblance of order.
- The scrap - Separate into magnetic and non-magnetic. Throw out stuff that looks too grungy to be of use (scrap bins in Machine Shop).
- DEAL WITH THE AUCTION SCRAP!
- Make sure the fire extinguisher is accessible...
Media Lab
Tasks
- Clean printers area
- Assess ink and print media supplies, order new stuff as necessary.
- Make a mobile media cart with mixer, mics, power, area for laptop and tower, screen mount, speakers.
- clean/organize media lab, move rarely used items to media lab’s new overflow storage plot.
- further research items to be purchased that were listed on 2020 media lab budget; VR ready workstation, camera, etc.
eLab
Tasks
- Vacuum floor
- Sweep and wipe off benches
Infrastructure
Tasks
- set exterior lights on B side to be on at night