Breaker Panels

Breaker Panels
Name	Breaker Panels
Zone	Infrastructure
Owner	i3Detroit
Make Model	Many, preferably Eaton
Part Number
Date Acquired	3/31/2010+
Storage Location	On various walls
Authorization Required
Status	Running
Value	0
Documentation
Other References

Intro

These are the breaker panels that power everything in the building.

http://chart.apis.google.com/chart?chs=250x250&cht=qr&chl=https://www.i3detroit.org/wiki/Breaker_Panels&x=.png
https://www.i3detroit.org/wiki/Breaker_Panels

ToDo

A-Side

Office Subpanel on South Wall of Shop Area

(Service from 100A breaker above main disconnect, next to water heater)

(Federal Pacific, use NA-NI or NC-NI breakers)

Location	Second Pole	Amperes	Description	Notes
1a	N/A	15	E-room east bench plugs, west hallway plug, big bathroom plug	Sheathed cable into joist above office
1b	N/A	20	Crafts room east and south wall plugs	Sheathed cable into joist above office
2a	N/A	20	Plugs on pillar between new elab and injection molding, lower plug on pillar north of tree house	Through pipe in floor past Tree House
2b	N/A	20	Classroom wall outlets except south wall and dooridor	Sheathed cable into joist above office
3a	N/A	15	Crafts room lights, classroom south outlet, dooridor floor level outlet, dooridor light	Sheathed cable into joist above office
3b	N/A	15	Classroom lights, classroom emergency exit light, dooridor ceiling & upper outlets	Sheathed cable into joist above office
4	N/A	20	Tree House plug on southeast corner pillar (bell is connected), plugs on east beam of Tree House, three plugs on horizontal beam on west side of Tree House, also appears on pillar between new e-lab and injection molding	Through pipe in floor
5	N/A	15	Fab room lights, e-room lights, e-room west bench plugs and west wall plug, bathroom lights and plug, big bathroom light	Sheathed cable into joist above office
6,8	N/A	20	Bathroom heat/fan	Sheathed cable into joist above office
7	N/A	15	Shop lights (mid-east; row 2)	Leftmost of two switches left of breaker panel, to mid-east junction box
9	N/A	15	Shop lights over commons tables (near-east; row 3)	Lower switch left of breaker panel, to near-east junction box
10	N/A	20	Foyer outlets, east shop ceiling fans, emergency exit lights at main door, exterior flood lights, classroom door iris	Conduit into office wall left of breaker panel
11	N/A	15	Shop lights (far-east; row 1 )	Rightmost of two switches left of breaker panel, to mid-east junction box
12	N/A	20	Shop plugs on east wall (lounge) (welding shop, CNC, kiln, injection molding)	Through pipe in floor
13	N/A	15	North shop furnaces	To near-east junction box
14, 16	18, 20	30	Rooftop AC and heat	To east loft junction box, then to roof
15	N/A	15	Commons tables cord reels	To near-east junction box
17	N/A	15	Plug over commons area: exhaust fan for Fab Lab, outlet strips for Tree House	To near-east junction box
19	N/A	15	Big light over Haas CNC	To mid-east junction box
21a	N/A	15	South-east shop furnace, and plugs on mezzanine wall above panel	To mid-east junction box
21b	N/A	20	Unknown	To west loft/attic (lower knockout)
22a	N/A	15	Fridge / coffeemaker	Plug left of breaker panel, top receptacle.
22b	N/A	20	Microwave	Plug left of breaker panel, bottom receptacle.
23a	N/A	20	Unknown	To west loft/attic (lower knockout)
23b	N/A	20	H-structure and cord reel just south of it	To near-east junction box
24	N/A	20	Hallway lights	To west loft (upper knockout)

Panel in SW Corner of Shop Area

(Pushmatic Electri-Center)

Location	Second Pole	Amperes	Description	Notes
1	2	100	Main
3	N/A	20	Shop plug behind stainless sink, SW roof vent fan
4	N/A	20	West shop ceiling fan, shop plug under west loft, media lab plugs
5	N/A	15	Rear shop lights, overhead power cord near utilitub, upper plug above fire ext on mid-shop pillar	No light switch
6	N/A	20	Not used
7	N/A	20	West shop emergency lights, west shop night lights
8	N/A	20	West shop lights, Tree House lights	No light switch
9	N/A	30	fablab
10	N/A	20	West shop lights, Tree House lights	No light switch
11	12	30	IT Rack UPS	Only using left pole
13	14	60	Subpanel in rear shop	Breaker replaced in April 2013

Subpanel in NW Corner of Shop Area

(Resembles Pushmatic Electri-Center)

Served by 60 amp breaker on SW panel.

Location	Second Pole	Amperes	Description	Notes
1	N/A	N/A	Spare	No breaker installed
2a	N/A	20	wolverine	one outlet in between lasers
2b	N/A	20	bumblebee	one outlet in between lasers
3	N/A	20	Shop plugs on west wall behind sheet-goods and user storage areas
4	N/A	20	Plugs on north end of two-sided user storage rack
5a	N/A	20	Plugs on north wall in western end of metal shop and on metal shop ceiling	Through handy box over woodshop/metalshop doorway
5b	N/A	20	Wire capped off in wall junction box next to user storage rack	Breaker appears to have failed; cannot be turned on
6	N/A	20	West shop wall, six southernmost plugs	Breaker was replaced on 01-20-2014
7	N/A	20	Wood shop plugs on north wall and plug next to breaker panel.
8a	N/A	20	Plug in paint zone, paint zone lights near surface grinder, metal shop lights	Through handy box over doorway next to air compressor
8b	N/A	20	Plugs on north wall in eastern end of paint zone metal shop	Conduit along north wall in loft
9	N/A	15	Roof exhaust fan over sewing CNC
10	N/A	15	B-side roof exhaust fan
11	N/A	20	Roof exhaust next to beam	Through handy box over woodshop/metalshop doorway
12	N/A	20	Plugs on wall between tool crib and metal shop and tool crib drop cord	Through handy box over woodshop/metalshop doorway

B-Side

Front Dividing Wall Panel

(120VAC panel located near the front door between A- & B-sides)

Location	Second Pole	Amperes	Description	Notes
1	Fill	me	in
2	Fill	me	in

Middle Dividing Wall Panel

(240VAC 3Ø panel on the middle of the A-B dividing wall in the Machine Shop)

Location	Second Pole	Amperes	Description	Notes
1	Fill	me	in
2	Fill	me	in

North Central Panel

(240VAC panel on the middle northern wall in the Wood Shop)

Location	Second Pole	Amperes	Description	Notes
1	Fill	me	in
2	N/A	15	Lighting circuit over the gantry tracks

Central Subpanel

(120VAC panel on the southeast corner of the loft structure in the to-be-Kiln Zone)

Location	Second Pole	Amperes	Description	Notes
1	Fill	me	in
2	Fill	me	in

South West Panel

(120VAC panel located on the southern wall bordering the courtyard in the to-be-Jewelry Zone)

Location	Second Pole	Amperes	Description	Notes
1	Fill	me	in
2	Fill	me	in