Category:Infrastructure

From i3Detroit
(Redirected from Infrastructure)
Jump to: navigation, search


Zone Information
Hardac.png
Zone Name Infrastructure
Status Active
Zone Slogan "The back end never looked so good."
Zone Coordinator(s) Evan AllenMark Furland
Zone Slack #infrastructure
Zone E-mail infrastructure@i3detroit.org


Zone Color Aquamarine
Paypal Button Pay money to Infrastructure

Introduction

This zone is currently an amalgamation of existing parts of the space that now have a single point of contact. A result of this is that there is no picture of the zone that would not also include all the other zones as the power conduits themselves are managed by this zone even as they worm their way into every crack and crevice. Another aspect of this zone is that there is very little that needs to be centrally located here on the wiki, most of the items have their own page or subcategory and these will be cleaned up but generally left to themselves and links to them consolidated here.

One of the responsibilities of the Infrastructure Zone is maintaining the Security Cameras and approved reviewers thereof.

Wishlist

Please check out our wishlist for specific items that we could use

Legal limits

The question frequently comes up why we don't do certain things. The answer given is usually 'it's not allowed', 'fire marshall said', or 'against our certificate of occupancy'. All of these are bad answers. The real answers comes from code that is not cited in the terse answers that are used to shut down people trying to do cool things. This is where we can keep track of reasons why we can't do things with sources cited so we can know when we meet the requirements to do the cool things.


Fire code stuff

Fendale uses International Fire Code 2012 and Michigan Building Code 2015

https://library.municode.com/mi/ferndale/codes/code_of_ordinances?nodeId=PTIICOOR_CH9FIPRPR_ARTIIFIPRCO

The fire marshal can modify fire code "when there are practical difficulties in the way of carrying out the strict letter of the code; provided that the spirit of the code shall be observed, public safety secured, and substantial justice done."


Item Description Source Code
Wood shop If the woodshop area is 2500 square feet or larger it needs a sprinkler system. Sprinkler systems are expensive, you have to pull a permit to connect directly to the city water line and the permit alone is at least $15,000 depending on where you're connecting to and what other lines are around that you have to avoid. Quote is from Fire Marshall visit (July 9 2018)
Note that the code only says this matters if we're fire group F-1, which would mean a bunch of other issue for us in terms of sprinklers and stuff unless we build that wall.
2012 International Fire Code Section 903.2.4.1 https://codes.iccsafe.org/public/document/IFC2012/chapter-9-fire-protection-systems
Fire extinguishers 75 feet of travel distance
30 feet of anything flammable. Code says it can be higher in some cases, but someone else will need to go understand the code
- Flammables storage containers
- Welding
- Jewelry

Placement: Easily accessible and marked well etc.

Hangers: at least 4 inches off the floor, less than 5 feet. If over 40 pounds, less than 3.5 feet.


Copies of a downloadable fire extinguisher map have been posted at various locations throughout the space.

2012 International Fire Code Section 906 https://codes.iccsafe.org/public/document/IFC2012/chapter-9-fire-protection-systems
Ceiling level storage no storage within 24 inches of the ceiling (not the metal joist, but the corrugated metal) Fire Marshall visit (July 9 2018) Unknown
We cannot have open flames or do auto work Our COO says we can't do auto work.
We would like to be fire group F1-1
https://codes.iccsafe.org/public/document/IBC2012/chapter-3-use-and-occupancy-classification

According to the international fire code, fire group F1-1 needs:
https://codes.iccsafe.org/public/document/IFC2012/chapter-9-fire-protection-systems

automatic sprinklers if
- fire area exceeds 12,000 sq ft; 1115m^2
- woodworking in fire area over 2500 sq ft 232 m^2
- Combined fire areas in entire building, including mezzanines exceeds 24,000 sq ft 2230 m^2

smoke/heat removal
- fire area more than 50,000 sq ft 4645 m^2


definitions:
- fire wall: external wall
- fire barrier: internal wall

We need a fire barrier

Fire barrier definition: international building code 707
https://codes.iccsafe.org/public/document/IBC2012/chapter-7-fire-and-smoke-protection-features
Fire group f1-1 needs a 3 hour barrier, made of "materials permitted by the building type of construction"

Openings can be less than 25% of the width of the wall

Doors and stuff have code requirements
interior exit passageway IBC 1023.3, not sure this is what we need
- TODO: lookup the door in a fire barrier rules

air ducts: IBC section 717.5.2
- We need "approved" fire dampers in the ducts unless
- Penetrations are tested in accordance with ASTM E 119 or UL 263 as part of the fire-resistance-rated assembly.
- Ducts are used as part of an approved smoke control system in accordance with Section 909 and where the use of a fire damper would interfere with the operation of a smoke control system.

Eric Merrill talked to a previous fire marshal in 2011, who said that he would count the current wall as a fire barrier, but we would need to fire rate the windows up top and the doorways. The easiest way to do the top would be to build wood frames and put 2 layers of drywall over it.
Fire Marshall (2011); international fire code 2012 and international building code 2012 Code inline links

Table of Equipment

Equipment Authorization Owner(s) Status
Atmosphere sensors No i3Detroit Usable but repair needed
Furnace: A North No i3Detroit Usable but repair needed
Furnace: A Middle No i3Detroit Usable but repair needed
16 segment mqtt display No i3Detroit Running
433 RF bridge No i3Detroit Running
Air Compressor No i3Detroit Running
Air compressor request buttons No i3Detroit Running
Breaker Panels i3Detroit Running
Dash Buttons No i3Detroit Running
Disco Button No i3Detroit Running
Drone CI Yes i3Detroit Running
RFID entry system No i3Detroit Running
EventBrite Yes i3Detroit Running
Ubiquiti EdgeRouter Lite No i3Detroit Running
Garage Gates No i3Detroit Running
Front Door Indicator No i3Detroit Running
Furnace: B Mid No i3Detroit Running
Furnace: B North No i3Detroit Running
Furnace: B South No i3Detroit Running
Furnace: Office No i3Detroit Running
Genie No Nate Bezanson Running
IoT Kiosk No i3Detroit Running
LED Matrix Display No i3Detroit Running
Large bathroom motion sensor No i3Detroit Running
Laser Zone Ceiling Fan No i3Detroit Running
Lights No i3Detroit Running
Middle east light switches No i3Detroit Running
Nortel GPSTM No Nate Bezanson Running
Office Thermostat No i3Detroit Running
OpenEVSE No i3Detroit Running
A-Side Network Switches Yes i3Detroit Running
Skynet Yes i3Detroit Running
Small bathroom motion sensor No i3Detroit Running
South vent No i3Detroit Running
Traffic Light No i3Detroit Running
TrippLite UPS No i3Detroit Running
Roof Vent Above Sewing No i3Detroit Running
Wireless LAN Controller Yes i3Detroit Running
Hardac Yes i3Detroit Running
Mcclellan Yes i3Detroit Running
Viki Yes i3Detroit Running
Furnace: A South No i3Detroit Down
B-Side Network Switch Yes i3Detroit Down

TODO List

^^click the title to edit the todo^^

The following list is an attempt to offer up suggestions of tasks that could be accomplished throughout the space by people interested in helping out.

Feel free to take charge of one or more of these items as your time and expertise allow. If you have taken charge of a task, please put your name into the field next to the task.

Should you run out of time or ability to complete a task, make sure to post on the mailing list and "fail loudly". This ensures that task status is shared, and no task languishes in silent failure.

General TODOs

Task Name Description Priority Deadline Champion
Front Door stop Front door bangs on gas meters, attach a doorstop to the floor to prevent 1 Jake
Floor Leveling on B-side Apply floor leveling compound to rough spots 1
Front door replacement Find a replacement door, probably frame, and install it 2
Power Runs Label all outlets with the panel and breaker that serves them 2
floor smoothing in wood shop needs real concrete 2
floor smoothing by laser/vinyl needs leveling compound, acid, whole nine yards 2
Thermal Insulation The space leaks some energy in winter, let's find some major leaks and get some solutions in place. Luckily some of our members have FLIRs. 2
Conduit Labeling Designate all conduits with the circuits contained therein, and "downstream" (toward-end-device) "flow" arrows. 3
Roof vent Wood shop vent needs one of the motors on the motor shelf near the bike zone to be installed. 3
Floor pour in old cart storage needs real concrete north of the treehouse stairs. 3
hot water heater look at securing north side to the wall 3
Building ground Tie all the breaker panels to the building beams for ground. Make sure the bus-bar is as well. 5
West wing north vent fan wiring The wire insulation is dead, and that entire area could use cleanup. 6
Rewire old woodshop panel to go off main disconnect instead of from A SW panel It used to be powered through the wall, but was split when A/B were seperated 6

Equipment TODOs

 TODO
Drone CI
  • Use slack and slack blame into some channel for announcements of pipeline status
  • Better way to edit server-side configuration (instead of re-creating the containers)
Furnace: A Middle
  • needs thermostat
  • Turn towards lasers?
  • Had a label saying fan doesn't work, worked fine for us though.
Furnace: A North
  • Needs a power cycle before it works? Only for cold start though?
  • New thermostat
  • Improve panel access, it's really annoying with how it's currently hung.
Furnace: A South
  • Pilot light won't stay lit, replace thermocouple
  • Needs thermostat
  • turn towards commons?
Furnace: B Mid
  • New Thermostat
Furnace: B North
Furnace: B South
  • Replace switch box on furnace
  • new thermostat
GenieYet to do, short term:
  • Coat battery terminals generously with anticorrosive.
  • Replace the base-run switch.

Wishlist, long term:

  • Diagnose and repair the platform-power connection.
  • Redo the vinyl lettering on the machine panels and sides.
  • Remove, sandblast, repaint, and reinstall the battery bays.
  • Ammeter for charging/discharging current?
IoT Kiosk
  • Add touchscreen capabilities
  • Nortel GPSTM
    • Use distribution amplifier to route 10Mhz/PPS to E-Room
    • Front panel VFD wiring/software
    • Integrate with ntpsec
    • Mount antenna
    • 48-hour site survey
    • Add PPS output from marked via.
    • Rackmount case
    OpenEVSEMaybe replace the i2c cable with something better. There are parts to build another one that has not been completed.
    RFID entry systemKnown esp rfid bugs (not reported to esp rfid because making test cases takes time)
    • a user badging in can scan as the previous user occasionally, so it says bad pin
    • doors crash a lot when reading the user list

    Next steps

    1. remove mqtt opendoor functionality
    2. write script to open door via websocket
    3. more error handling/timeout in the setting script so we can automatically retry in the future


    Choices

    1. medium term data source: make script to fetch from google, or update seltzer
      • make a script that can automagically pull the spreadsheet, but this is a google permissions issue and I think the best way is to create an account that only has read access to the spreadsheet and use credentials from that and I've been lazy.
      • Update CRM to replace slot with pin, and put all the keys back in the CRM.
    Traffic Lightmake PWM capable


    Digital Infrastructure

    Digital-infrastructure.png