Property:TODO
3
* make FAQ
+
* Actually install printer in space.
+
* Mechanical mounts for beaglebone to front panel
* 1-2" vent ducting to main vent
* Edit firmware to make prints take less time
* Laser calibration to try fixing edge non-linearity
* Replace hood
* DC power switch
+
* Printer fell and has trouble calibrating, diagnosis unknown.
* Replace hotend ([[User:Aurekana|Paul Frick]])
* Fix extruder thermal decoupling error
* Spool holder?
+
* replace broken/damaged frame pieces (New parts are on the shelf next to the printerbot)
* put all the parts back together and make sure it still works
==Fantasy WishList==
* install Repetier Firmware
* add a display and rotary encoder for standalone operation
* build a Power Tower to hold PSU and spool
+
* Heating element:
** Broken wires, needs replacing
* Filament extrusion issues
** Possibly due to heating element issue discovered around same time, but filament curling up around nozzle instead of extruding onto build plate
* Light bar:
** Needs to be connected to relay, then powered from the 24VDC machine power supply.
** Relay needs to be connected to Raspberry Pi I/O for the OctoPrint Environment plugin to control
* Credentials for OctoPrint and Pi need to be put onto machine physically,. and/or shared with [[User:Agmlego|Amelia Meyer]]
* MMU2S filament spools need a better holder. Maybe something like a retracting winder?
+
*Automated display of per-print cost.
*Cooling fan design/build.
+
*Troubleshoot calibration issue, G29 command causes hang and code crash
+
*Bring in rack mount computer to run the machine.
*Find a source for consumables.
*Determine what the materials costs are.
*Write up maintenance procedures.
*Write up procedures for use.
+
4
*Put a sign on the trailer that indicates usage rules.
*Mount the spare tire to the tongue.
+
A
Why does plugging a serial to usb thing into the serial port cause it to turn off.
That is sub optimal. +
Center Tailstock +
Need to have controller built +
Controller needs fixing/replacement. Foof/Brian need a couple round tuits. +
Clear out space in Woodshop
Run 220 and 110 circuits
Run connection to Dust Collection system
Setup Computer station to run machine
Determine Authorization Process
Determine Usage Costs +
B
Replace machine. +
Jan to develop training program
Make training kit
Make machine dust cover
Signage for cover
Develop user fee structure +
I need to take more photos and post them along with a link or two to some sort of airbrush how-to. I've never used one myself, so until I've accessed that content and played around with the airbrush, this page will remain a stub. +
Add a spring loaded hold down to the left (anvil) side +
